Auctioneer Posted August 6, 2017 Report Posted August 6, 2017 Alan Fox, the , strikes again. This time, the kiss of death has his sickle (gas saw) pointed at a 1983 M20J with 300 hours TT on it. No, it's not MY plane but has an eerily similar paint job. Who wants part or whole of an '83 J? How much?Sent from my iPhone using Tapatalk Quote
carusoam Posted August 6, 2017 Report Posted August 6, 2017 I recognize the engineer/MSer/NJMPer in that photo... Best regards, -a- Quote
Alan Fox Posted August 7, 2017 Report Posted August 7, 2017 21 hours ago, Auctioneer said: How much? Sent from my iPhone using Tapatalk I am not listing it on this site.....When it is ready , I'm sure someone here will post a link , and everybody can trash it , as you guys always do..... 3 Quote
Alan Fox Posted August 7, 2017 Report Posted August 7, 2017 On 8/6/2017 at 7:42 AM, Bob_Belville said: With the engine off I suppose you have something heavy under the cowl to keep the tail off the ground? Bob , I grabbed two shelf brackets from home Depot , safety wired them to the engine mount , (upside down) , and layed a board , and two sand bags on them... 4 Quote
Bob_Belville Posted August 7, 2017 Report Posted August 7, 2017 4 minutes ago, Alan Fox said: Bob , I grabbed two shelf brackets from home Depot , safety wired them to the engine mount , (upside down) , and layed a board , and two sand bags on them... Slick enough. Allows you to move the plane around on the ramp and into a hangar if necessary. 1 Quote
Guest Posted August 7, 2017 Report Posted August 7, 2017 6 hours ago, Alan Fox said: I am not listing it on this site.....When it is ready , I'm sure someone here will post a link , and everybody can trash it , as you guys always do..... We aim to please! Clarence Quote
Alan Fox Posted August 17, 2017 Report Posted August 17, 2017 Picked the engine up from Aero Engines of Winchester , New cam , New Tappett bodies , new bearings , seals hardware etc..... Fresh top overhaul.......Hung it last night , should be ready tomorrow sometime..... 6 Quote
Marauder Posted August 17, 2017 Report Posted August 17, 2017 36 minutes ago, Alan Fox said: Picked the engine up from Aero Engines of Winchester , New cam , New Tappett bodies , new bearings , seals hardware etc..... Fresh top overhaul.......Hung it last night , should be ready tomorrow sometime..... You're gonna need to change your name from the "Grim Reaper" if you keep bringing them back from the dead. Quote
Danb Posted August 17, 2017 Report Posted August 17, 2017 GRIM REAPER TO IT'S A KEEPER Thats all I got sorry Quote
Marauder Posted August 17, 2017 Report Posted August 17, 2017 4 minutes ago, bluehighwayflyer said: Agreed. But what should we call him? The savior might be a little much. He certainly isn't a savior. Especially coming from Jersey. How about "The Fixer"? 2 Quote
bradp Posted August 18, 2017 Report Posted August 18, 2017 I have a couple of semi religious themed monikers for Alan that I am gonna keep to myself. :-) Quote
kmyfm20s Posted August 18, 2017 Report Posted August 18, 2017 On 8/17/2017 at 6:31 AM, Marauder said: You're gonna need to change your name from the "Grim Reaper" if you keep bringing them back from the dead. Necrophile? 1 Quote
Andy95W Posted August 19, 2017 Report Posted August 19, 2017 On 8/17/2017 at 9:31 AM, Marauder said: You're gonna need to change your name from the "Grim Reaper" if you keep bringing them back from the dead. 3 hours ago, kmyfm20s said: Necrophile? I thought a Necrophile was someone who loves the dead- as in really "loves" the dead. Ewww. I thought a necromancer was someone who revives the dead. Talk about thread creep- this has turned into Thread Creep of the Living Dead... 1 Quote
Alan Fox Posted August 21, 2017 Report Posted August 21, 2017 And I flew it today , No excitement , Squeaked it in no problems...... 9 Quote
DaV8or Posted August 21, 2017 Report Posted August 21, 2017 2 hours ago, Alan Fox said: And I flew it today , No excitement , Squeaked it in no problems...... I imagine it feels good to save one every now and again... Feels even better when you know there will be a profit in the future! Good job! Quote
Seth Posted August 21, 2017 Report Posted August 21, 2017 4 hours ago, Alan Fox said: And I flew it today , No excitement , Squeaked it in no problems...... Alan- That's great news!!! I always admire that you fly the planes you do save a good 50 hours, many times more, to work out issues before prior to selling. Someome will a fixed up very low time M20J! -Seth Quote
peevee Posted August 21, 2017 Report Posted August 21, 2017 11 hours ago, Alan Fox said: And I flew it today , No excitement , Squeaked it in no problems...... Even I accidentally get a good landing once in awhile Quote
LANCECASPER Posted August 21, 2017 Report Posted August 21, 2017 1 hour ago, peevee said: Even I accidentally get a good landing once in awhile The only time i do I'm by myself. Quote
peevee Posted August 21, 2017 Report Posted August 21, 2017 15 minutes ago, LANCECASPER said: The only time i do I'm by myself. It's the forward cg with a passenger.... Screws it all up every time. Quote
Hank Posted August 21, 2017 Report Posted August 21, 2017 3 hours ago, LANCECASPER said: The only time i do I'm by myself. ALL of my solo landings are greasers! Quote
N6758N Posted August 21, 2017 Report Posted August 21, 2017 16 hours ago, Alan Fox said: And I flew it today , No excitement , Squeaked it in no problems...... Anyone who has flown with Alan knows that the last statement must be a lie... congrats Foxxy! Quote
DonMuncy Posted August 21, 2017 Report Posted August 21, 2017 8 hours ago, LANCECASPER said: The only time i do I'm by myself. With absolutely no one watching! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.