65eTurbo Posted January 15, 2020 Report Posted January 15, 2020 Hi all. Since I don't really use it for.anything like timed holds or approaches anymore, I'm thinking about removing my davtron clock and using the hole for something else. I'm assuming the timers in an attached gps or a timer app in an ipad serve the legal requirement for a timer or clock. Am I thinking about this correctly? Quote
Bob - S50 Posted January 16, 2020 Report Posted January 16, 2020 2 hours ago, 65eTurbo said: Hi all. Since I don't really use it for.anything like timed holds or approaches anymore, I'm thinking about removing my davtron clock and using the hole for something else. I'm assuming the timers in an attached gps or a timer app in an ipad serve the legal requirement for a timer or clock. Am I thinking about this correctly? An app in the tablet does NOT meet the requirement. If your GPS can display the TIME to the nearest second then that would. While I can dig through the pages to find the time in our GTN, there is no easy way to get to it so I don't consider my GTN to meet the legal requirement. I'm hoping I can convince somebody that counts that the clock on the NORSEE AV-20S works. Quote
donkaye Posted January 16, 2020 Report Posted January 16, 2020 13 hours ago, Bob - S50 said: An app in the tablet does NOT meet the requirement. If your GPS can display the TIME to the nearest second then that would. While I can dig through the pages to find the time in our GTN, there is no easy way to get to it so I don't consider my GTN to meet the legal requirement. I'm hoping I can convince somebody that counts that the clock on the NORSEE AV-20S works. The GTN does permit placing a timer and clock in a couple of the data fields, but it doesn't provide hours minutes and seconds, so it wouldn't qualify. Seconds are needed for holding patterns for old technology and clock for EFC times, so it doesn't look like that FAR requirement will be changing anytime soon. (updated previous posting) 1 Quote
PJClark Posted January 16, 2020 Report Posted January 16, 2020 timer on G3X touch works great...and it's the only "clock" I know of in my panel now. Quote
0TreeLemur Posted January 16, 2020 Report Posted January 16, 2020 1 hour ago, Bob - S50 said: An app in the tablet does NOT meet the requirement. If your GPS can display the TIME to the nearest second then that would. While I can dig through the pages to find the time in our GTN, there is no easy way to get to it so I don't consider my GTN to meet the legal requirement. I'm hoping I can convince somebody that counts that the clock on the NORSEE AV-20S works. There are letters in pdf format from the FAA here and there online saying that they don't get too bent out of shape over the definition of a clock in a certified aircraft. If it is permanently installed in the aircraft, displays time to the nearest second, and can be seen by the pilot, it is an acceptable clock. The AV-20S does that. I think it is an excellent timer, with the nice feature of having a backup AHRS attitude indicator. 1 Quote
EricJ Posted January 16, 2020 Report Posted January 16, 2020 The Avidyne IFDs will display time to the second on the top of the main display, and also have some settable timer functions accessible through the menu. Quote
Bob - S50 Posted January 16, 2020 Report Posted January 16, 2020 4 hours ago, donkaye said: I thought that putting the timer as one of the data fields would work, but when I tried it on the simulator it either doesn't work or there is a bug in the program. I'll try it in the actual GTN. If it works, then I think that would qualify because it is in plain view and could easily be set. But a timer is not a clock. Pretty sure the regs say clock. We can display the time in a field on the map page but it doesn't include seconds. Quote
pwnel Posted January 23, 2020 Report Posted January 23, 2020 Yup, I went through this exercise looking for regs when my original mechanical clock was INOP and came to the conclusion that it's not legal for IFR flight (I have a 430W). So I installed a Davtron. Frankly I prefer a separate system like that - always found the timer on the G1000 to be somewhat obscure. Quote
OR75 Posted January 23, 2020 Report Posted January 23, 2020 I installed a MidCon MD93 clock / USB chargers Looks good .... but I use the USB charger a lot more than the clock - clock is set for Zulu time Quote
201Mooniac Posted January 23, 2020 Report Posted January 23, 2020 (edited) 2 hours ago, pwnel said: Yup, I went through this exercise looking for regs when my original mechanical clock was INOP and came to the conclusion that it's not legal for IFR flight (I have a 430W). So I installed a Davtron. Frankly I prefer a separate system like that - always found the timer on the G1000 to be somewhat obscure. I also have a Davtron M877 but I've been wondering if it meets the requirements as it doesn't display seconds, just the flashing colon between the hours and minutes. I've been meaning to check if that meets the regs. I was told by Garmin that the clocks on the GTNs and the GDUs do not meet the requirement. Update: Checked with Davtron, they said it is a grey area and won't comment on whether they meet the requirement of not. Edited January 23, 2020 by 201Mooniac Update Quote
gsxrpilot Posted January 23, 2020 Report Posted January 23, 2020 As far as I'm concerned, the IFD540 qualifies. As @EricJ points out, you can specify a datablock to display hours/min/seconds permanently on the screen. 2 Quote
PT20J Posted January 24, 2020 Report Posted January 24, 2020 Mooneyspace would be so much less fun if everyone just used Google https://www.faa.gov/about/office_org/headquarters_offices/agc/practice_areas/regulations/interpretations/Data/interps/2016/Nkugba - (2016) Legal Interpretation.pdf Skip 1 Quote
Ragsf15e Posted January 24, 2020 Report Posted January 24, 2020 3 hours ago, PT20J said: Mooneyspace would be so much less fun if everyone just used Google https://www.faa.gov/about/office_org/headquarters_offices/agc/practice_areas/regulations/interpretations/Data/interps/2016/Nkugba - (2016) Legal Interpretation.pdf Skip Ahh yes, but “permanent display “? Does that mean that something like the av-20s can’t be a clock because time is not displayed permanently- ie, no time shows on the ADI screen? What about my gns430w... time is “permanently” buried 4 button clicks away. My head hurts. Btw, I just paid $300 to have my mechanical windup clock mounted in the yoke refurbished, so I’m legal! Quote
carusoam Posted January 24, 2020 Report Posted January 24, 2020 Rags, Where did you send your clock? Best regards, -a- Quote
Ragsf15e Posted January 24, 2020 Report Posted January 24, 2020 2 minutes ago, carusoam said: Rags, Where did you send your clock? Best regards, -a- I think I found the place on MS. Waltham aircraft clocks in Ozark, AL. I just looked, it was $212 for the “overhaul”. Came back looking and working like new. 1 Quote
Bob - S50 Posted January 24, 2020 Report Posted January 24, 2020 11 hours ago, Ragsf15e said: Ahh yes, but “permanent display “? Does that mean that something like the av-20s can’t be a clock because time is not displayed permanently- ie, no time shows on the ADI screen? What about my gns430w... time is “permanently” buried 4 button clicks away. My head hurts. Btw, I just paid $300 to have my mechanical windup clock mounted in the yoke refurbished, so I’m legal! I think we've been through this before. Since it doesn't have to be a dedicated clock, I think something like the AV-20S might work but I still am not sure it that particular unit can be used for other reasons. As a required piece of equipment for IFR flight, does the clock has to be TSO'd? If so, the AV-20S won't work because it is NORSEE. If the clock does not have to be TSO'd then I think the AV-20S would work just fine. Quote
JimB Posted January 24, 2020 Report Posted January 24, 2020 Not sure what TSO would apply to a clock. I don't believe the GT-50 is TSO'd but it sure seems you can install it. https://static1.squarespace.com/static/5282b286e4b01dd0edf58599/t/53425a22e4b099c54d4c4e0d/1396857378209/100S-13-31.pdf https://www.davtron.com/cmsAdmin/uploads/FAA-installation-replacement-clock-Davtron-090310.pdf Quote
PT20J Posted January 24, 2020 Report Posted January 24, 2020 I think you are making this too hard To quote 21.601 (1) A TSO issued by the FAA is a minimum performance standard for specified articles used on civil aircraft; Part 91 specifies which equipment is required to meet specific TSOs. Examples are GPS navigators and transponders. There is no such regulatory requirement for a clock. If you have anything mounted in your panel that will continuously display time in hours, minutes, and seconds, you’re good. Skip 5 Quote
Gagarin Posted January 24, 2020 Report Posted January 24, 2020 (edited) I had this watch for 20 years and never needed to replace the battery. It works with ambient light. I set it with www.time.gov and found it to be very accurate. Edited January 24, 2020 by Gagarin Quote
0TreeLemur Posted January 25, 2020 Report Posted January 25, 2020 8 hours ago, PT20J said: I think you are making this too hard To quote 21.601 (1) A TSO issued by the FAA is a minimum performance standard for specified articles used on civil aircraft; Part 91 specifies which equipment is required to meet specific TSOs. Examples are GPS navigators and transponders. There is no such regulatory requirement for a clock. If you have anything mounted in your panel that will continuously display time in hours, minutes, and seconds, you’re good. Skip Blessed brevity, it still exists! Quote
JimB Posted January 25, 2020 Report Posted January 25, 2020 21 hours ago, PT20J said: I think you are making this too hard To quote 21.601 (1) A TSO issued by the FAA is a minimum performance standard for specified articles used on civil aircraft; Part 91 specifies which equipment is required to meet specific TSOs. Examples are GPS navigators and transponders. There is no such regulatory requirement for a clock. If you have anything mounted in your panel that will continuously display time in hours, minutes, and seconds, you’re good. Skip There you go! Quote
kortopates Posted January 25, 2020 Report Posted January 25, 2020 I had this watch for 20 years and never needed to replace the battery. It works with ambient light. I set it with www.time.gov and found it to be very accurate. I've had the Blue Angeles titanium version of this watch for years and it's awesome - but not a replacement for the panel IFR clock.The watch is much more accurate though because it synchs nightly via radio to the gov time source and uses no battery - it's solar powered too.Just recently to the high tech Garmin aviator watch which is very nice since it monitors my O2 and much more but it needs to charged frequently unlike my old citizen.Sent from my iPhone using Tapatalk Quote
McMooney Posted January 25, 2020 Report Posted January 25, 2020 mount the watch permanently to the panel, should be good. Quote
amillet Posted January 26, 2020 Report Posted January 26, 2020 This is the factory installed clock in our 97 J. Clock only displays hour and minutes. Timer mode displays seconds. Is this not IFR legal? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.