PJClark Posted June 25, 2022 Report Posted June 25, 2022 Apologies if this has been asked and answered. Can't imagine it hasn't but could not find it with search: is there any reason NOT to use water and Dawn to degrease the airplane belly? need a quick answer so I can go do this today, been slackin' pretty much all year Quote
kortopates Posted June 25, 2022 Report Posted June 25, 2022 (edited) I don't know if its safe. But if your going to diverge from aircraft cleaning products with so many safe ones to choose from, you really need to ensure its not alkali. Alkalis are not good for aluminum and should be avoided. My guess it it may well be safe, but likely very ineffective with exhaust soot too. A very effective belly cleaner available everywhere is Mineral Spirts/Stoddard Solvent. Edited June 25, 2022 by kortopates 1 Quote
jetdriven Posted June 25, 2022 Report Posted June 25, 2022 PTI-2001 degreaser. It splits the grease and its safe for ariplanes. https://www.aircraftspruce.com/catalog/cspages/pti09-04184-8.php?clickkey=575135 Quote
GeeBee Posted June 25, 2022 Report Posted June 25, 2022 Don't see why not. They use it to degrease wildlife. As said, a good degreaser, exhaust soot I would guess not. The main reason it is not used more often is excessive suds. Quote
pirate Posted June 25, 2022 Report Posted June 25, 2022 I along with many others have used dawn regularly for prepping / cleaning aluminum parts building experimentals for many years. I also have used it for years cleaning my Mooney belly skins during annuals. 1 Quote
LANCECASPER Posted June 25, 2022 Report Posted June 25, 2022 24 minutes ago, PJClark said: Apologies if this has been asked and answered. Can't imagine it hasn't but could not find it with search: is there any reason NOT to use water and Dawn to degrease the airplane belly? need a quick answer so I can go do this today, been slackin' pretty much all year I like these for the belly. https://www.amazon.com/Tub-Towels-Heavy-Duty-Multi-Surface-Cleaning/dp/B00022W4ZU/ref=sr_1_1_sspa?crid=3VCUHXNDYNPU3&keywords=degreaser+wipes&qid=1656172113&sprefix=degreaser+wip%2Caps%2C149&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExUTlDT0VTRk1BMk9JJmVuY3J5cHRlZElkPUEwNjQ1NjQxMUFVNUgyMkVINzVBWCZlbmNyeXB0ZWRBZElkPUEwOTc4NDE5NUlONU1FM0dJQU42JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== No spraying so you don't get it into crevices that may later cause corrosion. And no dripping to get in your eyes. Dawn has been mentioned before. Here's an example: Quote
smwash02 Posted June 25, 2022 Report Posted June 25, 2022 I've always used gojo hand cleaner and terry cloths. Make sure it doesn't have pumice! You gently rub it on and it all rubs right off. Depending how bad you let it get you'll need a couple towels because they'll get saturated quickly. 1 Quote
PT20J Posted June 25, 2022 Report Posted June 25, 2022 I've always used Carbon-X. Easily removes exhaust and oil. https://www.aircraftspruce.com/catalog/cspages/chemcokleenjet.php Quote
M20F Posted June 25, 2022 Report Posted June 25, 2022 Important to note Dawn will strip any wax you have applied. Quote
GeeBee Posted June 25, 2022 Report Posted June 25, 2022 Like Skip I use Carbon-X but I don't see any problem with Dawn except it removes wax, but just about everything that cuts grease will remove wax including Carbon-X, solvent etc. Just make sure you rinse it all off with clear water really good and lubricate any fittings it touches. Quote
EricJ Posted June 25, 2022 Report Posted June 25, 2022 I've used Dawn, but frequent rinsing is a good idea. I try to minimize its use on an airplane, since it is not great for aluminum. The original white goop hand cleaner works awesome for cleaning belly grease, landing gear, etc. Takes it right off with blue shop towels. Harbor Freight usually has it on the shelf, too. https://www.amazon.com/GOOP-Cleaner-Waterless-Non-Toxic-Biodegradable/dp/B001ENOLZ2 Quote
Brandt Posted June 25, 2022 Report Posted June 25, 2022 Buddha Belly. www.planeperfect.us Safe for aluminum. Works great. Quote
M20 Ogler Posted June 25, 2022 Report Posted June 25, 2022 (edited) 4 hours ago, smwash02 said: I've always used gojo hand cleaner and terry cloths. Make sure it doesn't have pumice! You gently rub it on and it all rubs right off. Depending how bad you let it get you'll need a couple towels because they'll get saturated quickly. +1 for Gojo. It’s like the grease was never there and it works fast. Make sure it’s kind without pumice Edited June 25, 2022 by M20 Ogler Quote
jetdriven Posted June 25, 2022 Report Posted June 25, 2022 The active ingredient in Gojo and goop is deodorized kerosene Quote
Pinecone Posted June 25, 2022 Report Posted June 25, 2022 5 hours ago, M20F said: Important to note Dawn will strip any wax you have applied. YES. In the auto world, you use Dawn to remove all wax before using a clay bar to remove embedded stuff, and then start the coating process all over. Quote
Pinecone Posted June 25, 2022 Report Posted June 25, 2022 There is a Simple Green for Aircraft. I have some for other uses. Do NOT use normal Simple Green. It will eat aluminum. Quote
Andy95W Posted June 25, 2022 Report Posted June 25, 2022 For the belly, mineral spirits and those nice blue paper towels. Probably cost about 5¢. Just my 2¢ worth. If you use Byron’s suggestion of kerosene and old towels, it would probably be an actual 2¢. Quote
EricJ Posted June 25, 2022 Report Posted June 25, 2022 1 hour ago, jetdriven said: The active ingredient in Gojo and goop is deodorized kerosene And the beauty of those two products is the deodorization and the ease of application and that you then leave it on the shelf to clean your hands. Plus stability and safety and... Quote
jetdriven Posted June 25, 2022 Report Posted June 25, 2022 41 minutes ago, Pinecone said: There is a Simple Green for Aircraft. I have some for other uses. Do NOT use normal Simple Green. It will eat aluminum. Actually, simple green for Aircraft destroys the paint. I know this because we used to wash with it regularly and soon after the paint began to chip and flake and peel off because it was basically dried out, looking at the situation carefully, it takes the plasticizers out of the paint and it basically destroys it. I should’ve gotten the message whenever I was washing the belly and the stuff ran down to my armpit and caused a infuriatingly painful red rash there. 1 Quote
PJClark Posted June 25, 2022 Author Report Posted June 25, 2022 No Dawn, GTecniq W9 for belly, ONR wash and GTeqnic C2V3 liquid Crystal to finish it off 3 Quote
N201MKTurbo Posted June 25, 2022 Report Posted June 25, 2022 Out here in Arizona, dawn is the best time to degrease your belly. It’s too stinking hot later in the day. From someone who just spent 4 hours outside, sanding the oxidized paint (from ‘68) off the old Cessna. 1 Quote
RobertGary1 Posted June 26, 2022 Report Posted June 26, 2022 10 hours ago, GeeBee said: Don't see why not. They use it to degrease wildlife. As said, a good degreaser, exhaust soot I would guess not. The main reason it is not used more often is excessive suds. Dawn actually is amazingly abrasive Quote
GeeBee Posted June 26, 2022 Report Posted June 26, 2022 10 hours ago, RobertGary1 said: Dawn actually is amazingly abrasive interesting Quote
carusoam Posted June 26, 2022 Report Posted June 26, 2022 Dawn is great for cleaning Pelicans… and hands… -a- https://www.npr.org/2010/06/22/127999735/why-dawn-is-the-bird-cleaner-of-choice-in-oil-spills Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.