Aspen EFD1000 Pro 5000.00

[Alan Fox]

Complete Aspen EFD 1000 Pro , looks great , 

[mike_elliott]

@PTK

[Marauder]

[mention=7035]PTK[/mention]

You’re bad.


Sent from my iPad using Tapatalk Pro

[gsxrpilot]

Is this a PFD or MFD or can it be configured as either?

[Marauder]

Is this a PFD or MFD or can it be configured as either?

If it is a PFD 1000, you can have an avionics shop convert it to a MFD. the configuration module may need to be changed out.


Sent from my iPad using Tapatalk Pro

[gsxrpilot]

6 minutes ago, Marauder said:

If it is a PFD 1000, you can have an avionics shop convert it to a MFD. the configuration module may need to be changed out.

 

Hmmm... I wonder what that would cost. It would be great if it could be converted to an MFD and upgraded to MAX at the same time for the $3K upgrade cost.

[Marauder]

Hmmm... I wonder what that would cost. It would be great if it could be converted to an MFD and upgraded to MAX at the same time for the $3K upgrade cost.

Worth asking.


Sent from my iPad using Tapatalk Pro

[LANCECASPER]

5 hours ago, gsxrpilot said:

Hmmm... I wonder what that would cost. It would be great if it could be converted to an MFD and upgraded to MAX at the same time for the $3K upgrade cost.

If you're going the MFD route, you're better off just buying an MFD rather than converting a PFD. Aspen sold me new one with emergency battery backup for $5995 in July.

[MATTS875]

7 minutes ago, LANCECASPER said:

If you're going the MFD route, you're better off just buying an MFD rather than converting a PFD. Aspen sold me new one with emergency battery backup for $5995 in July.

Which model mfd did you get? I’m looking at this possibility also

[gsxrpilot]

Yeah, I'd like to get an MFD now that a PFD/MFD MAX combo will eliminate the need of the G5 backup AI... and all the other steam gauges.

[LANCECASPER]

3 minutes ago, MATTS875 said:

Which model mfd did you get? I’m looking at this possibility also

That was an MFD1000. 

[Bryan]

Don’t happen to have an EA100 and an ACU2, too?

[Alan Fox]

6 hours ago, Bryan said:

Don’t happen to have an EA100 and an ACU2, too?

Im sure I could find one

[Oscar Avalle]

Alan, I am looking for a second aspen to add to my current Aspen Pro 1000. My objective would be to get rid of my vacuum system and back up gauges. Can you help?


Sent from my iPhone using Tapatalk Pro

[carusoam]

@Alan Fox Oscar is looking for you...   ^^^^

-a-

[gsxrpilot]

Aspen does have refurbished units to sell... occasionally. It's worth checking. I recently bought a refurbished Aspen MFD from Aspen for $4995.

[craigsteffen]

I get completely confused as to which model of the Aspen is which.  Is this the model with CDI bars for both navigation and glideslope on it, or not?  And does the HSI section display map segments on, say, any approach, or just the current leg that you're on? 

Is this new or has it been installed in an aircraft before?  (If the latter, I'm wondering about the STC legalities of buying and installing it.)

Thanks for any info.

[Alan Fox]

Best to speak to your installer , This is the pro system , it is used , and has the HSI , all mods except SVS