M20E panel upgrade

[oldguyscanfly]

Thank you!

[Greg Ellis]

On 10/29/2019 at 8:22 AM, Keith20EH said:

So I finally committed to my panel upgrade by removing nearly 20lbs of old, outdated, radios, wire and junk from my panel, thought you might like to see my pile.  Modest Garmin panel scheduled for late November

 

 

I know how you feel.  This was just part of my pile when I re-did my panel.  They found wires leading no-where.  Some were live.  It was just a mess.

[Bob_Belville]

Don't dismiss the value of your junk.

I sold a KR87 ADF on EBay when I redid my panel in 2012 for $880 to a guy in western Canada where NDB is still common. In total I got $6197 for what we pulled out. That was double what the avionics shop would allow in trade. 

[Keith20EH]

Panel update:  modern left side, classic right side (for now).  I highly recommend Byerly Aviation (KPIA) if anyone needs avionics work.  GNX 375 is very capable.

[carusoam]

Great pic, Keith!

Thanks for sharing it....

Great pirep for Byerly too...

Best regards,

-a-

[TX-Champ]

Here's what we did with our '70 M20C:  

 

[TX-Champ]

A few more images of our '70 M20C.  Thank you Aero Comfort for the nice work on the seats and side panels.

 

[carusoam]

Sparkling new interiors, like a brand new plane...

Best regards,

-a-

[Sturges]

On 9/25/2020 at 8:52 AM, TX-Champ said:

A few more images of our '70 M20C.  Thank you Aero Comfort for the nice work on the seats and side panels.

Did Aero Comfort do your yokes as well? Those look really nice.

[TX-Champ]

Yes, they did the yokes. The blue tape is protecting the PTT buttons while we finish installing placards, etc.  

[Pilot boy]

What are you putting in it.  My gauge layout is eerily similar on my 64 E.  I’m putting some money into it in November to upgrade the panel.