PARTING OUT MOONEY M20R

[Chrigi]

parting out Mooney M20R Ovation with IO-550-G, prop strike. Let me know what you need!

 

Ailerons 400 USD each

Wingtips with lights 500 USD each

and much more

 

 

[charlesual]

Do you happen to know if the wingtips fit an F model? If so, I’d like to buy.


Sent from my iPhone using Tapatalk

[MarkD34M]

I'd like to purchase the oil temp prop that sits under the oil cooler if available. 

[Alan Fox]

44 minutes ago, charlesual said:

Do you happen to know if the wingtips fit an F model? If so, I’d like to buy.


Sent from my iPhone using Tapatalk

Wingtips will not fit an F , the ailerons are different

[charlesual]

Aw, bummer. Do you happen to know if the landing gear motor would fit an F?
Thanks Alan


Sent from my iPhone using Tapatalk

[Alan Fox]

10 minutes ago, charlesual said:

Aw, bummer. Do you happen to know if the landing gear motor would fit an F?
Thanks Alan


Sent from my iPhone using Tapatalk

It will not , as your F is a 14 volt system , and all R models are 28 Volt , What year is your F ??

[charlesual]

1967


Sent from my iPhone using Tapatalk

[charlesual]

I want to swap out the 20:1 ratio for 40:1.


Sent from my iPhone using Tapatalk

[Nick Pilotte]

Where are you at for shipping considerations? Some of these parts are big enough for local pickup or will require crating. What year or serial number is it so we can check fitment of parts?

[testwest]

Any of the rocker switches available? I am looking for a Radio Master switch (E-T-A type) in black with white letters.

[Niko182]

What year ovation was it?

[carusoam]

Welcome aboard, Chrigi.

Appears as though something is a bit amiss....
There is a first for everything...

Post a bunch of pics when able...

Is there a pic of the panel?

Is this an O1, O2, O3.... G1000, waas capable...

How is the electric fuel pump controller...LO/HI... the LO wears out first...

How are the flap control relay electronics... they have a tendency to wear...

Got the Porsche 944 clock in there?

PP questions only... not necessarily in need of anything yet...

Best regards,

-a-

[Chrigi]

Hi

 

It's a 96' model. Attached some panel pictures. Location is Switzerland. For most parts shipping should be not a big problem, except for the large items.

Yes I have still all rocker Switches. 

And 28V Aircraft. About 1500h TT so maybe the switches are still ok:)

 

Best Regards 

 

 

[Niko182]

If someones looking for yokes to upgrade, its probably the time to shine. 

[MIm20c]

Hard to see a ‘96 being put down. Hopefully there was a lot more damage than just a prop strike, otherwise it’d be nice to see it in the air again. Your prices look really good. 

[Ross Taylor]

Those are nice yokes, @Niko182 - PM sent @Chrigi

[Cruiser]

I would be interested in the rudder trim complete with all hardware. 

[carusoam]

Probably some SIC brakes to go with that too...
 

Some really nice chairs, front and back...

The air handling system is really nice...

Doc John put an O interior in his M20F...

Just sharing some ideas of things that have been done around here...

Best regards,

-a-

[Niko182]

The seats is a really big one too. On the O's they're fully adjustable.

[Skates97]

2 hours ago, Niko182 said:

The seats is a really big one too. On the O's they're fully adjustable.

Will the seats fit a vintage plane?

[Niko182]

4 minutes ago, Skates97 said:

Will the seats fit a vintage plane?

Yes

[Tahir K]

Rookie here:

if I were to buy and install the VSI and/or the Altimeter and/or the HSI...Would I need some other paperwork or something for any of them? Are they certified to put in my 66' E? Would I need anything else to go with either of those instruments?

[jetdriven]

Anytime you open the static system, you need to do a pressure test. And A&P can do this.

[gsxrpilot]

I'm tempted by the glare shield with integrated compass.

[Ross Taylor]

@Tahir K - keep in mind that any of these electrical instruments, like the HSI, are 28V.  They won't work in either your E or ours...at least not without a lot of extra gymnastics.  But of course that's not an issue for the vacuum instruments, except for lighting.