Bob_Belville Posted February 5, 2017 Report Posted February 5, 2017 This thread is just getting started! Wait 'til some of us get our new cowl and post pireps. 5 Quote
Tom Posted February 5, 2017 Report Posted February 5, 2017 On 2/2/2017 at 3:09 PM, Bob_Belville said: The "Flight Bonus" STC'd speed mod kit for the Skylane included Astroturf on the front of the cowling to decrease slippage of air behind the spinner (and associated drag). http://www.hortonstolcraft.com/Flight_Bonus_ACM.pdf 1 Quote
Sabremech Posted February 6, 2017 Author Report Posted February 6, 2017 I almost finished the rear baffle panel on my upper cowl. Just need to put the flame resistant sealant on and it's finished. I also worked on a new air filter box today and am liking it so far. Much better than the fiberglass one I made for my airplane. I'll install this on mine and make sure it fits like I expect it to. David 6 Quote
jamesm Posted February 6, 2017 Report Posted February 6, 2017 Hi David, So regarding the Hartzell scimitar HCIC2YR- 1BFP F7497 2 blade propeller and 835-54(P) spinner what will allow me to move the larger 14" diameter backing plate ? would that be in your cowl mod STC allow a '67C owner to deviate from P920 TC or ???? Just curious James '67C 1 Quote
Sabremech Posted February 6, 2017 Author Report Posted February 6, 2017 Hi James, That would be included in the DER's form 8110 as part of my mod. David 1 Quote
carusoam Posted February 6, 2017 Report Posted February 6, 2017 David is working The Over-time toooo-night! Hard work + Preparation = Success Looking good, David. Best regards, -a- Quote
Mcstealth Posted February 6, 2017 Report Posted February 6, 2017 On February 4, 2017 at 10:59 PM, MyNameIsNobody said: Compared to what? Little Timmy? Keep on trucin'... Nope. No more crying wolf from me. 1 Quote
Raptor05121 Posted February 7, 2017 Report Posted February 7, 2017 I am praying to the Mooney gods that one day I may be blessed with this mod and alleviate me from the 420*F+ CHTs I see on climbout...in the winter... 1 Quote
Ned Gravel Posted February 7, 2017 Report Posted February 7, 2017 10 hours ago, Raptor05121 said: I am praying to the Mooney gods that one day I may be blessed with this mod and alleviate me from the 420*F+ CHTs I see on climbout...in the winter... If you have 420+ deg F CHT temps in climbout (in the winter no less) there are some serious holes in your doghouse. Just sayin....... 1 Quote
Oscar Avalle Posted February 7, 2017 Report Posted February 7, 2017 I am praying to the Mooney gods that one day I may be blessed with this mod and alleviate me from the 420*F+ CHTs I see on climbout...in the winter... I join you in your prayer! If you find a solution let me know, so I start praying to the same gods. Sent from my iPhone using Tapatalk 1 Quote
DXB Posted February 7, 2017 Report Posted February 7, 2017 14 hours ago, Raptor05121 said: I am praying to the Mooney gods that one day I may be blessed with this mod and alleviate me from the 420*F+ CHTs I see on climbout...in the winter... 1 hour ago, Oscar Avalle said: I join you in your prayer! If you find a solution let me know, so I start praying to the same gods. Per www.godchecker.com, I think the correct deity is Kui-Xing, the Chinese God of Official Documents and Paperwork. I would ask if he has any sway with pushing Sabremech's STC paperwork through the FAA. Also tell him my engine burnt an exhaust valve for him recently as an offering 3 Quote
Raptor05121 Posted February 8, 2017 Report Posted February 8, 2017 11 hours ago, Ned Gravel said: If you have 420+ deg F CHT temps in climbout (in the winter no less) there are some serious holes in your doghouse. Just sayin....... There are a lot of holes. I don't have the tools or expertise to combat them. 1 Quote
Ned Gravel Posted February 8, 2017 Report Posted February 8, 2017 1 hour ago, Raptor05121 said: There are a lot of holes. I don't have the tools or expertise to combat them. This is one of those times where, instead of selling your strengths (where you make money), you may be required to buy your stated weakness (lack of expertise and tools) to do it for you. Like this. The unfortunate consequence of this action is complete and utter loss of any standing in the CB club. Sorry. 3 Quote
Hank Posted February 8, 2017 Report Posted February 8, 2017 39 minutes ago, Ned Gravel said: This is one of those times where, instead of selling your strengths (where you make money), you may be required to buy your stated weakness (lack of expertise and tools) to do it for you. Like this. The unfortunate consequence of this action is complete and utter loss of any standing in the CB club. Sorry. It will be your choice, Raptor baby--buy some sheet metal work (took me two annuals' worth), or buy some new cylinders. Nothing personal, that's just how it is . . . . 1 Quote
TTaylor Posted October 5, 2018 Report Posted October 5, 2018 Bump. David, How do we work with you to get a spinner kit for the 3-balde? Hartzell Part number: Hartzell 3 blade Spinner: A-2295-4P Mounting kit: A-2476-7 Quote
Sabremech Posted October 6, 2018 Author Report Posted October 6, 2018 HI TTaylor, I'd probably just need to buy them through Hartzell or get TCB Composites to manufacture composite spinners. I've been fairly focused on the new cowling and will need to get back on the spinner options again. Thanks, David Quote
Bob_Belville Posted October 6, 2018 Report Posted October 6, 2018 @Sabremech, David, great to see you at Summit last weekend. I hope you had a lot of continued interest in the SabreCowl. Quote
cctsurf Posted October 7, 2018 Report Posted October 7, 2018 On 2/7/2017 at 7:30 PM, Raptor05121 said: There are a lot of holes. I don't have the tools or expertise to combat them. I've heard great things about a little RTV silicone used to fill holes lowering temps. I need to see about that sometime myself. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.