Jump to content

Most Controversial Mooney Poll (may involve casualties)


Prop orientation poll  

66 members have voted

  1. 1. How do you store your prop when parked outside?

    • Whichever way it stops
      21
    • Top blade vertical
      12
    • Horizontal (2 blade)
      26
    • Bottom blade vertical (3 blade)
      3
    • Diagonal
      4


Recommended Posts

Posted

I expect a lot of bloodshed, this is an extremely controversial topic. I hope our renowned physicist can explain the forces acting on a still propeller at different angles and the harm they might bring.

How do you leave your propeller when parked outside? Why?

Posted

Which ever way it takes to keep birds from being comfortable on it, while not allowing water to settle into the seals.

Now it's indoors, does it matter?

-a-

  • Like 1
Posted

Outside?  Two blade horizontal because if it rains moisture is going to pool up in the clamp/seal area of the hub. Why not turn it horizontal so water doesnt even get in? Another reason is the bottom blade is low, a careless ramp person may be able to get into the low blade with a towbar/tug.

Posted

In one year my airplane will be parked outside - when it rains - maybe a day per month (and maybe less). If it rains hard I think that the water will get everywhere no matter what the position. So most of the times I'll leave it wherever it stopped.

Posted

When your engine stops it stops on the same compression stroke e.g.(cylinder #1 will be at top center each time you shut down).  I randomly pull my propeller through differn't strokes after each shut down to keep wear on the cylinders and rings more even.  Then I leave the prop in a horz position because it looks better.  If you notice my avatar its in the vertical position.  Oh well.

Posted

My prop (3-blade) usually stops with the top blade vertical, although sometimes bottom vertical. I always rotate it to top vertical because otherwise the blade gets in the way of the Power Tow I use to push it back into the hangar. Even when I'm parked outside, I usually rotate it top vertical because it seems like this would just shed water better, and maybe be a slightly less- interesting bird perch.

Posted

If I need to move the airplane the prop goes horizontal so I can use the tow bar. If it is snowing outside I make the prop vertical so the snow melt can run out and not freeze in the spinner. Other then that I don't care. The engine always stops with the prop at 2:00.

Posted

I always remove the prop and put it in the plane for safe storage. This keeps the birds from making a mess but is quite bothersome when stopping for a burger. Sometimes I'll get lazy and not do it if I'm only stopping for a couple of hours. My expense for safety wire is horrendous. 

  • Like 2
Posted

Well when I used to have a 2 bladed prop, I'd leave it vertical, so rain/snow would drain out the bottom of the spinner...

 

Now, I have to leave the top blade vertical or I cant use the tow bar...

 

g

Posted

When I'm at home, in the hangar, it stays where it stopped.  Usually 10:00/4:00.  I commute to work in my plane and store it in a community hangar with a bunch of "high-wingers" so I rotate it to a horizontal position so that there's no chance of them hitting my prop with a wing.  Hopefully, they're not that close to me, but you never know. 

 

Don

Posted

2 blade horizontal. Out of the way of the tow bar. No long white stripes from a sitting bird. Now to find a way to keep the birds off the blade antennae on the vertical stab.

With the Rocket I would feather it occasionally to exercise that feature. Sometimes just to see if I got an odd look. That something is different but I can't say what look can be amusing.

Posted

I voted horizontal, not because I do anything with the prop, I just leave it where it stops. The FBO that stores it moves it to horizontal so they can tow, and that is where it stays.

Posted

If I need to move the airplane the prop goes horizontal so I can use the tow bar. If it is snowing outside I make the prop vertical so the snow melt can run out and not freeze in the spinner. Other then that I don't care. The engine always stops with the prop at 2:00.

You must have to vary your takeoff time to account for varying winds.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.