Jump to content

'65 Mooney M20C Parts for Sale

salty

By salty
in Avionics / Parts Classifieds

 Share

Recommended Posts

salty Proficient

salty

Posted
Posted

As most of you know, we had an off field landing in our Mooney last year. http://www.kathrynsreport.com/2022/01/mooney-m20c-n79396-incident-occurred.html

I acquired the salvage and have many parts available. I've begun the disassembly, and will be posting images of things that are available, but if you have need for a specific part, please reach out even if there is no picture for it. Initially, I will be asking for offers, but as time permits I will eventually put prices and better information on things. Any reasonable offers will be accepted. This is a bit of an "eating an elephant" situation, so I ask for patience and can't guarantee quick turnover, but if you need quick response I will try and prioritize your request.

None of the listed parts has damage from the accident. All were 100% operational on last flight, but have not been tested since. Sales are "as is".

More information or better pictures can be accommodated upon request.

KI-201C CDI

 

IMG_1359.png IMG_1360.png

 

Mooney ASI

 

IMG_1361.png IMG_1362.png

 

Mooney VSI

 

IMG_1363.png IMG_1364.png

 

Mid Continent Altimeter

 

IMG_1365.png IMG_1366.png

 

EGT Gauge

Gauge only, no probe

IMG_1369.png

 

Electric Powered Vacuum Pump

 

IMG_1372.png

 

Vacuum Pump

 

IMG_1373.png

 

Vacuum System Parts

 

IMG_1375.png

 

Mooney / Grimes Beacon

Worked when removed, but sounds like a coffee grinder.

IMG_1377.png IMG_1378.png

 

14VDC to 26VAC Transformer

 

IMG_1379.png

 

Voltage Regulator

For 50 Amp Generator

IMG_1380.png

 

Suction Gauge

 

IMG_1387.png IMG_1388.png

 

Nav Lights

 

IMG_1389.png

 

Battery Box

 

IMG_1391.png

 

Electrical Rack Shelves

 

IMG_1392.png

 

Lower Cowl Induction System / Intake Filter

No damage

IMG_1393.png

 

Coat Hangar

 

IMG_1395.png

 

Rear Seat Flashing

 

IMG_1396.png

 

Overhead Control Placards & Knobs

 

IMG_1397.png

 

Control Rods Yaw & Pitch

 

IMG_1398.png

 

Flight Enhancements Electric Step Actuator

 

IMG_1399.png

 

Wing Root Fairing Right - PN 120001 - 6

 

IMG_1400.png

 

Retractable Step

 

IMG_1401.png

 

Aft Wing Fairing Right - PN 120000-10

 

IMG_1402.png

 

Lower Cowl

No damage

IMG_1403.png

 

Right Elevator

No damage, but some minor trailing edge imperfections

IMG_1404.png

 

Door

Dent in top, but still seals perfectly

IMG_1408.png IMG_1409.png

 

Upper Cowl

 

IMG_1410.png IMG_1411.png

 

Tail Cone Access Panel - PN 913014-501

 

IMG_1412.png

 

Misc. Access Panels

 

IMG_1413.png

 

Avionics Access Panels

 

IMG_1414.png IMG_1415.png

 

Cowl Cheeks

 

IMG_1416.png

 

Airtex Carpeting

 

IMG_1418.png IMG_1419.png

 

Plastic Interior Pieces

Some pieces have minor cracking, many are perfect

IMG_1420.png

 

Mooney MAP & Fuel Pressure Gauge

 

IMG_1457.png IMG_1458.png

 

Control Tube Ball and Socket Mooney P/N 710001

 

IMG_1480.png

 

TO / GA Momentary Button

 

IMG_1481.png

 

Control Yoke Shaft, Mooney P/N 720005 Left & Right

 

IMG_1482.png

 

Pilot Side Yoke

PTT button in left thumb

IMG_1483.png

 

Copilot Side Yoke

 

IMG_1484.png

 

Original Mooney Gold Console placarding

 

IMG_1485.png

 

Rapco Brake Lining 3 pair RA66-111

 

IMG_1486.png

 

O-ring AN6230B-6 X 3

 

IMG_1487.png

 

Control Yoke Tapered Pin, Mooney P/N AN386-1-10A, 2 used, 1 new

 

IMG_1488.png

 

Yolk Assembly, Mooney P/N 710006

 

IMG_1489.png

 

Brake Resevoir, Mooney P/N 850006-501 & Parking Brake Valve Asbly, P/N 4200-A1

 

IMG_1490.png

 

Jack Shaft Assembly, Mooney P/N 710007 & Tubes P/N 915001

 

IMG_1491.png

 

Bellcrank Assembly, Mooney P/N 914016

 

IMG_1492.png

 

Gear Down Switch

 

IMG_1493.png

 

Gear Down Lock Bracket, Mooney P/N 560046-501

 

IMG_1494.png IMG_1496.png

 

Flap Handle, Mooney P/N 750006

 

IMG_1498.png

 

Pilot side air vent eyeball, Mooney P/N #2120 & #1794

 

IMG_1499.png

 

Radio Cooling Box, Mooney P/N 810036-1

 

IMG_1500.png

 

Baggage Door

 

IMG_1501.png IMG_1502.png

 

Main Gear Left & Right

There could be significant damage to some parts of this assembly due to the off field landing with gear down.

IMG_1503.png

 

Mooney Brakes

 

IMG_1504.png

 

Main Gear Wheel Assembly Left & Right

 

IMG_1505.png IMG_1507.png

  • Like 1
Link to comment
Share on other sites
DXB Grand Master

DXB

Posted
Posted

Hi - If you have them, I'd like to buy: (1) the complete adjustable cowl flap system (I do not need the flaps themselves) - I have a '68 where they were in fixed position and I want to convert them to adjustable.   (2) the metal duct tubes on each side that blow air on your feet on each side and are controlled by a butterfly valve near the end (the butterfly valves in mine a broken).  

Link to comment
Share on other sites
salty Proficient

salty

Posted
  • Author
Posted

alas, the air handlers are already spoken for. I might have what you need for the cowl flap system, but I'm not certain it's all together. The cowl was already removed when I got the plane back. I'm pretty sure I have the knob and cable, and probably the pushrods. But, I think part of that system is integral to the engine mount, is it not?

Link to comment
Share on other sites
salty Proficient

salty

Posted
  • Author
Posted
2 hours ago, glbtrottr said:

Md200-306, Tom 170c and indicator, and usb - pm me prices pls -


Sent from my iPhone using Tapatalk

I would greatly appreciate offers. I won't be offended, if we can't agree on value, then we both move on, no harm. I'm still disassembling and trying to organize this mess....

Link to comment
Share on other sites
  • 4 weeks later...
Weston Rookie

Weston

Posted
Posted

Hey there, what is the best way to organize getting this done and maybe pics of brake cylinders and steering horn/components?  I dont know how to do private messages on here?  

I have a fellow named Joyce Ashiow emailing and calling from a Google Voice number… I was getting the feeling that is a scammer, but please let me know if it is you:)

Many thanks.  W 

Link to comment
Share on other sites
TheAv8r Rising Star

TheAv8r

Posted
Posted
2 hours ago, salty said:

I would prefer to sell the whole door. Or the door whole. Whichever is more correcter.

Door whole makes me think of something else... :lol: Haha can definitely understand that. If you change your mind, feel free to shoot me a PM. 

Link to comment
Share on other sites
Alan Fox Grand Master

Alan Fox

Posted
Posted
On 5/11/2023 at 12:20 PM, Jerry Pressley said:

down lock could only have paint problem.  I have half a dozen that look identical and only one has actual metal wear. 

Its trashed , Its shaped like an egg , Throw it in the trash, Or give it to Jerry....

 

Link to comment
Share on other sites
Sabremech Veteran

Sabremech

Posted
Posted
48 minutes ago, Alan Fox said:

Its trashed , Its shaped like an egg , Throw it in the trash, Or give it to Jerry....

 

I agree with Alan. This downlock block is a gear collapse waiting to happen. It’s quite worn. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.