Leaderboard

Hi everyone. I can finally stop kicking tires and truly be part of the club. Eternal thanks goes to Richard Simile and Don Kaye for their expert guidance and sticking with me despite my numerous questions! I could not have done this without them both. I am extremely pleased with this purchase. Now I need to build time and experience. Another thank you goes out to others in MS who answered questions and helped me home my selection. I hope I can pay back. Freddy

I am not sure how many of us on Mooneyspace have actually contracted COVID, I was defiantly one of the unlucky ones! mine started out as pretty benign, just mild flu symptoms. By the end of the first week I was in the emergency room, they pumped me full of steroids', magnesium and several other things. the next couple of days had me thinking I was on the mend and would be back to normal. then I went down hill, I apparently went into a mental fog, spent most of my time sleeping, and although i was up moving around I do not really remember about 4 days. my doctors put me on a Z pack a week after my emergency room visit, and I probably would have ended up in the hospital had I not come out of my fog. once I did I improved every day, I am still dealing with the pneumonia but finally able to get back to normal routines. The funny thing about contracting the Virus is I'm not exactly sure how I got it. I was pretty much isolated preceding it, the only place I was outside of work was when my wife and I went out for dinner (right time frame). Thankfully no one I was in contact with got the virus from me especially my wife, I couldn't imagine both of us being sick at the same time. especially knowing how much she was doing just taking care of me, I am surprised we do not have to replace the washer and dryer. Brian

My plane has been down for quite a while. Probably another month or so. Mostly flying other people’s planes. So by your criteria I’m a total looser

As long as the paperwork doesn't require it, you won't notice anything off center after an hour of flight.

Steps have some attraction to the older aviator. If you plan on aging or selling to one who fits that category, the option for a step might be worthwhile. In my youth I once was able to do a spin-leap onto the wing of DC-3. Now I sometimes wonder how I will get up from sumping the fuel . . .

It's gonna be a halfway warm weekend! Yaay again! I'm going flying tomorrow! Yaaaaay, Me! Anyone going anywhere in AL, GA or FL panhandle??? Flying with friends is much more fun.

The crank snout and prop attached to it are closed, with an inlet exposed to the pressure created by the governor. The piston inside the prop hub moves to equalize pressure between the input oil and the prop spring and prop forces (mostly the centrifugal twisting force). If the prop forces pushing back on the piston exceed the input pressure, it'll push the oil back out, and it'll either go out around the bearing journals or back through the governor (or both). The inlet to the crank snout is in the same bearing as the normal oil galley feeds to the #1 journal, and the governor feed comes in between the other two galley feeds. On the passenger side of the front of the engine you can see the hard line that brings the governor output pressure from the accessory case and feeds it to the middle of the main bearing. There's not any seals between the middle part supplied by the governor and the ends between the normal galley feeds other than the normal bearing clearance. A groove makes the governor oil prefer the route into the hole in the crank snout to drive the prop, but otherwise it can escape around the bearing clearance, and does. It is an expected relief path for the prop oil, but if there is additional excess pressure from the prop the oil can return to the prop governor and potentially even back to the main oil pump. Pic of the split main bearing below. The end parts are the normal clearanced bearing surfaces fed by the main galley supplied by the oil pump. The governor pressure comes into the center part, which has much larger clearance and feeds the hole in the crank snout that is in that region.

I see now that Dr. Susan Northrup has been appointed the new Federal Air Surgeon. I hope to see good things coming as she was the SE regional and before that worked for the airlines getting pilots back in the air. She wants to move away from snail mail to e-mail and getting faster responses. From what I have seen of her in the past, she has a pretty common sense approach so I hope things will improve.

I guess that kicks out the cfi’s since we fly different n numbers all the time

That's actually not a bad idea... My plane's been down since end of Sept. so you can ignore everything I post

Glad you’re feeling better. I’m ready for this to be over.

One of my favourite topics. I know people are skeptical, but we actually did some testing and on an old Mooney it is significant. Depending on your target speed the penalty of the step is 1 to as much as 4 kt. 4kts is WOT and trying to achieve true max cruise speeds. 1 kt is at slower “loiter speeds”. The reason is not purely the drag caused by the step....which is significant, but also because it puts the aircraft out of optimal trim. You can see this by looking at the ball with the step up vs down. With the step down you will induce an out of trim condition which impacts best cruise speed. You could of course keep your foot on the left rudder to counter this, or one could rig it out if strapping the step down. I would estimate the the speed penalty is about half drag and half trim. So, for as much money as we spend on Mooneys to go fast, this can be quite a penalty. You can see said speed comparison in a video on our web site....but it is like watching paint dry. (Correction...video is not linked in this version of web site, but I can dig it up if someone is interested). By the way, modern long bodies have a shorter step due to the ground posture of the aircraft. They are also more aerodynamic and sit more in the wake of the wing. All this accounts for a much smaller speed penalty.

Did someone call for a Bollt?

Do it in the Mooney, particularly the 40 hours of hood time. You’ll grow your retract time quickly and earn an IFR discount as well. Some insurances will allow you to prorate a discount based on hours mid year if you gain the experience.

I will have a life long resentment against AOPA finance. The banker they put me with said point blank “you can’t afford an airplane.” After lecturing him with a sharp tongue, I hung up on him, went thru EAA’s preferred vendors, had the money right away, and never missed a beat. I’ve also barred any banks that denied me capital loans in starting my business the opportunity of ever getting any of my future business. One of my petty grudges I choose to keep up. =) end rant

The fact that FAA hasn’t made certification for modern engine gauges a simple process is one of the most frustrating things. Lose attitude indication- might die. Lose airspeed indication, might die. Auto pilot malfunction/trim, might die. Lose RPM reading, shrug shoulders and fix as soon as practical. Lose fuel level, same. Lose MP, same. Lose oil pressure, cautiously land. WTF? EDM 830- not certified. Insight products, etc etc. Tell me those aren’t as good as the trash still existing in the retro fleet. I’ll wait.

This might be a little crass, but what the heck. I'll come forward and mention it. I've found that when I'm looking at advice and posts and I'm wondering about "how good or accurate" that advice might be, I harvest the commenter's tail number and head over to flightaware to take a look at their recent flight history. Shallow - yes. Invasive - yes. Illuminating - yes, I think so. Anyone else do this or am I the only scoundrel?

My wife and I got it through Christmas and New Years and we were very lucky. We both had it very light. Had colds much worse than this. It was an excuse to sit, isolate, and watch movies without any guilt. The worst part was losing taste and smell and not lose any weight.

Maybe Timmy should rate everyone's credibility while you're at it

I suspect a lot of the lore about cycling props a number of times to get warm oil into the hub is left over from World War II. Many World War II aircraft were equipped with Hamilton Standard Hydromatic propellers. Hydromatic propellers have a large hub with a lot of surface area that must hold a couple of quarts of typically 120W oil. It can get pretty thick when it's cold. These props also have a double acting piston, so oil coming in on one side pushes out the oil on the other. It was standard practice to cycle these props a few times until the response became acceptable. I think it's likely the pilots just carried over the procedures from their military days when they took up civilian flying after the War. Skip

Knock yourself out having your mechanic list six pages of discrepancies. As a seller my only responsibility is to deliver an airworthy airplane. I'll have the one or two issues identified as airworthiness addressed but the other 43 things are on the buyer. Too many buyers, especially first time buyers expect the seller to fix everything found on a pre-buy inspection. Sorry, this is a 50 (or 30 or 20) year old airplane. If you want factory new, you need to buy factory new.

The H means the head is drilled, the A at the end means there is no hole in the threaded end for a cotter pin.

And yet so many 337s get filled out and STCs sold for things that aren't defined as major alterations...

It’s funny because I sent him a piece of the door seal five years ago and had 30 people lined up for deposits and that whole thing blew up too. The gift keeps on giving, because my door seal was now too short to use for a door seal, I used it for the baggage door. Then when I ordered a cabin door still two years ago the BA706M seal from Brown changed suppliers , and it’s like flat and crushed and that was crap too so now there’s no door seal options

A personal eulogy for a long time friend. He is in a better place.

https://www.advancedpilot.com/articles.php?action=article&articleid=1838 "Remember, 50°F ROP is the worst possible mixture setting from a detonation standpoint, from an overall heat standpoint, and from a stress standpoint, because the peak pressures are occurring very soon after TDC, beating on that poor piston like the hammer of Thor." good read I think Disclaimer I was supposed to paste the whole article apparently, but I think linking it keeps the spirit of the Author's intent.

Unit, What’s the big deal... You have no fear of the virus... Other people do... I get it. Let’s not be mean to everyone because you don’t live in fear... It turns into an I’m better than you are argument faster than you can type... Its as fun as my plane is better than yours... Kind of takes the fun out of being part of MS... Its the weekend... yay! Best regards, -a-

The impulse coupling lag angle is 5 deg less than the advance, so I believe it fires at 5 deg BTDC in either case. Skip

Prop hub oil is typically dark no matter what the sump oil looks like.

I misunderstood your comment as suggesting that the higher C/R engine would benefit from more advance than its stock C/R brethren. Misfire on my part. I too would like to see the Lycoming's original data but my guess looking at Nigel's data is that 100ROP was their target mixture setting. My next guess is that for certification, 25° was found to be the best combo with consideration to power, temperature and low RPM operations. The SI you posted baffles me. I have never found the IO360 to be a challenge to cold start whether timed to 20° or 25° BTDC. I'm sure I wouldn't be able to discern the difference if I was not told.

My power supply failed. LEDs cost the same as replacing the one power supply. It was a really easy decision, and OSUAviatior, who participates on this site, sells them cheap.

When looked I saw a number of examples that had undergone a step-ectomy. Kinda like a Mooney bris in a way.

Hello This is to now share with you the repair went well. Problem of leakage is fixed back in the air Philip

I think that comes off a bit rude and naive. I don't think it's right to judge people for being afraid, considering that nearly half a million people died from it alone in the USA. I am under 30, in shape and not overweight, not diabetic, and have no known heart issues ( that I know of), so the risk for me is practically non existent. That however does not apply to a good amount of people that I know. Nearly everyone on this board can financially afford to get covid. We all own airplanes. Most people don't and most people can't afford an airplane, let alone taking paid time off, or the cost of getting sick and needing help without insurance. Every time I want to go somewhere, I hate the idea of wearing a mask, or social distancing, or having to get food to go, but I deal with it and do it for other people. Not everyone is as financially stable or healthy as most of us are on this board. Just offering a different perspective to look at it from.

Hopefully this'll help as it sounds like we have the same cluster. As-removed from my 1968 G at last annual, replaced with an EDM900. EDM 900 pic included to show that it's a near-perfect fit where the original cluster goes. All gauges were working when removed and I plan on listing the whole set for sale along with the working as-removed fuel pressure/manifold pressure gauge. Engine is a Lycoming O-360-A1D, 26 gal tanks. The individual fuel gauges have different part numbers and different electrical connections as one is male, one is female (see pics). If you want to verify part numbers, the individual gauges can be easily removed from the front by unscrewing the single screw holding it until the screw is loose, then pull on the screw itself to slide out the instrument. The left fuel gauge shows a stamped date of Mar 6 1968, with an additional stamped date of Oct 11 2002 which I assume is a rebuilt/refurbished? date. The right fuel gauge has a handwritten sticker on it covering the original stamps and I know not what it means.

Life changes, no matter how much we might not care for the change. I am very sad to hear this news. This is quite shocking. Stacey was an incredibly huge part of the Mooney legacy through so many transitions over so many years. He is, and was one of the “Boots” stars of our movie about the wonderful people who built Mooney and stuck with the factory for years and years, through it all. Stacey was a completely dedicated employee for the Mooney legacy. He was the main glue that helped keep all together. One could not ask for a more dedicated person. What a HUGE loss!! I’m sincerely hoping Stacey has found another path that will make him very happy. Thank you Stacey Ellis for all.

The original manufacturer is Garwin Carruth, who sold this branch of digital instrumentation in the 80s and still exists under the name Sigma tek. The garwin" gauge cluster " is no longer manufactured nowadays but the plug-in indicators in this cluster are still available. These are the cluster gauges reference 169 L of which here is the link. For volume gauges, they are adjustable according to the resistance of the sensors and the graduations are either interchangeable with your model or to be specified in your order of new gauges. http://www.sigmatek.com/cluster_gauges.html

Been almost a year that I joined this community - when starting to look for a plane. Here in Europe, the market is rather small. My journey made me visit at least 5 birds - and I'm greatful people here would always be providing helpful answers. I closed the deal last autumn. Thought it's time to introduce her. It's a 1978 J - with 1400h and in pretty basic condition. Happy to start transforming her into a hopefully safe and faithful IFR companion. Greets from Germany, Martin

My instructions from Penn Yan on breaking in my rebuilt 0-360 was to cycle the prop on run up once just enough to get a response and to avoid dropping the RPM to the extent practical.

Not trying to be cute here, but the most dangerous part of GA is that our planes move fast enough that they can kill humans that are inside of them and, less often, humans that are not inside of them.

This is been tried before on here, search is your friend.

No CO monitor currently but will invest

Yes, the tool makes it pretty easy. I think it keeps it within a fraction of a degree if you're careful, and I doubt it needs to be any better than that. Magnetos don't strike me as precision instruments.

My step has been removed for 40 years. It’s not listed in the TCDS. It is not required for flight. I even found a right side wing root faring that was clean with no holes drilled or cut into it. Thus no ugly patch. Minor modification. Doesn’t meet the criteria for a 337. I’m impressed that you have a 1025 UL already. Keep the step for the future owner. -Matt

Tell that to my family members and friends who have died from it.

Tony, To clarify, Garmin didn't change anything here. There are (and have been since the GI275's inception) three different types of pointers...from the Garmin GI275 Pilot's Guide below. The "V turned sideways" is the VNAV profile indicator...as defined by your GTN750's nav profile, which indicates a VNAV profile is currently active. It should not be confused with being established on an approach glidepath or glideslope. Although you may have VNAV guidance indicating on a portion of your descent and approach profiles, you should see either a glidepath or glideslope indicator as in one of the first two indications below once GP mode is captured. In other words, once a GP or GS mode is captured, the "V" and associated "<" change to a "G" and a solid diamond...color based on the type of approach. Next time you're flying an approach, can you capture a picture of the glidepath (not VNAV profile) symbology? I'd like to see what you're referring to in case I've missed your point. I notice you did mention "HSI" above, so the symbology may be different between the ADI and HSI, but wanted to ensure the differences were called out. Steve

Get a little light upside down and the engine will run out of gas after a few seconds, restarting when positive Gs are resumed. The same will also result in several ounces of oil dumping from the breather unless there is an air/oil separator or other inverted system. A few ounces will make a heck of a mess on the airplane and hangar floor.

This is very different than the 3100 cry... If you recall... the 3100 came with send a PO... a purchase order is a commercial document with terms and conditions... For me, I had a problem with the ethics of sending a PO, that I didn’t intend to honor... Sending a letter to an MSer letting him know my interest... that isn’t hard at all... My AP is aging... I am learning as much as I can about the available options... We don’t have many options... Don’t do anything unethical... Every sales organization understands triangle patterns... of 100 letters sent... 10 may ultimately turn into a sale... If we don’t organize a communication drive... Dynon will spend their time where they feel the most interest is... If C150Space starts writing letters... Dynon will put C150s at the top of their work list... Dynon and Garmin have been working their way through lists of plane approvals... Garmin has done an impressive job from the top of the Mooney alphabet towards the bottom... The 3100 is somewhere... see if you can even get a call back.... STec doesn’t seem to have the strength required to pay attention to Mooney details... you can have any color you want as long as it’s black... - H. Ford... Its not their fault... but, they only have vanilla. A good sales guy knows how to get what the company wants... from what the potential customers are able to give... I’m very impressed with Greg’s approach.... Expect to have to hit this nail a few times... again and again... more sales management 102... PP thoughts only, still reeling from those Stec discussions... MSers wanted them, had the money for them, but couldn’t get them, and still were left hanging... Best regards, -a-

There must be a select Saint in charge of weary mechanical devices that we can pray to... for support... Best regards, -a-

The original one is no longer available. I upgraded to a new Eaton one with increased amperage. $$$! It later failed miserably, so installed the original one. You can take it apart and clean contacts. I would not buy a new one. -Matt