Jump to content

Looking For Pics Of An Installed GTN750Xi In Your Mooney

GeneralT001

By GeneralT001
in Avionics/Panel Discussion

 Share

Recommended Posts

GeneralT001 Rising Star

GeneralT001

Posted
Posted

I'm wondering what config you have in the stack with that GTN750Xi....I'm guessing there is just enough room for the GTN750Xi...Auto Pilot and maybe an Audio Panel?

carusoam Grand Master

carusoam

Posted
Posted

GT,

Have you found where everyone stores their picture galleries?

 

With the GTNs…. There are good options for remote mounting the xponder and audio panel…

you might have room for two 750s…

the 750 is very shallow at the top of the box… allowing it to be mounted near the top of the stack…

Lets see if Greg has any insight… @Baker Avionics

Best regards,

-a-

GeneralT001 Rising Star

GeneralT001

Posted
  • Author
Posted
Just now, carusoam said:

GT,

Have you found where everyone stores their picture galleries?

 

With the GTNs…. There are good options for remote mounting the xponder and audio panel…

you might have room for two 750s…

the 750 is very shallow at the top of the box… allowing it to be mounted near the top of the stack…

Lets see if Greg has any insight… @Baker Avionics

Best regards,

-a-

Yeah, I definitely would be going with remote on the Audio panel (GMA35R) and Trans/ADS-B (GTX345R). So really there would just be the 750Xi a GTR225 COMM and the Auto Pilot?

carusoam Grand Master

carusoam

Posted
Posted

Garmin has done a nice job of making everything fit in the standard M20J panel…

There are many examples around here…

Stand by for somebody to point you towards their panel pics…

If you want to see some long body pics… I can point you in a few good direction…

-a-

GeneralT001 Rising Star

GeneralT001

Posted
  • Author
Posted
Just now, carusoam said:

Garmin has done a nice job of making everything fit in the standard M20J panel…

There are many examples around here…

Stand by for somebody to point you towards their panel pics…

If you want to see some long body pics… I can point you in a good direction…

-a-

Is it the same physical dimensions as the M20J panel?

carusoam Grand Master

carusoam

Posted
Posted
10 minutes ago, GeneralT001 said:

Looks nice....why can't all that new be $200,000!! :)

It can be….

If they could sell about 20k each year…

This is approximately the number of Corvettes coming out of the Bowling Green facility each year…

 

Imagine for a moment…

Mooney having an aftermarket department…

Where you could go there and select a new instrument panel for your plane…

I’d fly down to Kerrville to get what Niko is showing….

a set price, discounted by the hundreds they could sell every year….

Compared to the one off price we all get at our local shops…

-a-

  • Haha 1
GeneralT001 Rising Star

GeneralT001

Posted
  • Author
Posted
33 minutes ago, ZuluZulu said:

I don't have an Xi, but it's practically the same size.

2x G5
GTN 750 (legacy)
GMA 35c (remote)
GNC 255A
GFC 500
JPI EDM-830
GTX 345

IMG_7641.jpeg

Very nice indeed. Would you like to have a moving map right in front of you or having it to the right side is fine?

toto Grand Master

toto

Posted
Posted
2 hours ago, GeneralT001 said:

I'm wondering what config you have in the stack with that GTN750Xi....I'm guessing there is just enough room for the GTN750Xi...Auto Pilot and maybe an Audio Panel?

It's very common to see a 750, an audio panel, and an AP control head in the radio stack - this is the setup I have in my J. But I think even if you remove the audio panel and the AP (and even if you relocate the annunciator panel), there won't be enough room to do two 750s stacked vertically. Every dual-GTN install I've seen in the center stack is a 750 and a 650. 

  • Like 1
ZuluZulu Mentor

ZuluZulu

Posted
Posted
15 hours ago, GeneralT001 said:

Very nice indeed. Would you like to have a moving map right in front of you or having it to the right side is fine?

The GTN is not that far away, pretty easy to monitor. I plan to get a G3X Touch eventually but it’s not because the GTN is somewhere other than right in front of me. I fly VFR now though. Maybe I’ll want the map in front of me once I start IFR but its placement has not been a problem. 

  • Like 1
  • 2 weeks later...
Comobowz Enthusiast

Comobowz

Posted
Posted

in an Ovation but….that’s a GNX 375 below the GTN and I preferred a panel mount audio panel over the remote variety.
EAB1B908-CECD-4D71-9973-2FE77A4AEE3F.thumb.jpeg.6daebc24f95a06b83b0a3fb59dffaccb.jpeg

  • Like 2
ZuluZulu Mentor

ZuluZulu

Posted
Posted
1 hour ago, Comobowz said:

in an Ovation but….that’s a GNX 375 below the GTN and I preferred a panel mount audio panel over the remote variety.
EAB1B908-CECD-4D71-9973-2FE77A4AEE3F.thumb.jpeg.6daebc24f95a06b83b0a3fb59dffaccb.jpeg

How well do the GTN and the GNX work together?

  • Like 1
Comobowz Enthusiast

Comobowz

Posted
Posted

Not as much as I would probably like, but I’m hopeful that it gets better with software updates. No crossfill as of yet. Otherwise, it’s fine. If I was doing it from scratch would do a 650xi and a gtx 35r, instead of the 375/255 but my first upgrade when I purchased her last year was to replace the Gtx 335 and the KLN 94B with the 375, so I already had it.


Sent from my iPhone using Tapatalk

WAFI Rising Star

WAFI

Posted
Posted
On 1/21/2022 at 12:29 AM, ZuluZulu said:

I don't have an Xi, but it's practically the same size.

2x G5
GTN 750 (legacy)
GMA 35c (remote)
GNC 255A
GFC 500
JPI EDM-830
GTX 345

IMG_7641.jpeg

Just curious where’s your audio panel?

Lance Link Collaborator

Lance Link

Posted
Posted

We did ours just like Jay Bird except put the autopilot under the 830 and we were able to put both the transponder and com 2 under the 750.  Works really well.

WAFI Rising Star

WAFI

Posted
Posted
8 hours ago, ZuluZulu said:

The GMA 35c is remote-mounted and controlled through the GTN 750 soft keys.

https://www.garmin.com/en-US/p/73817/pn/010-00831-41

Ahh I got it. I know you can get a remote comm but didn’t know there was a remote audio panel. Nice!

I like your replacement switches, any chance you know brand or PN?

ZuluZulu Mentor

ZuluZulu

Posted
Posted
7 hours ago, WAFI said:

Ahh I got it. I know you can get a remote comm but didn’t know there was a remote audio panel. Nice!

I like your replacement switches, any chance you know brand or PN?

Are you asking me or @Jay Bird? Mine are original. 

Brent Collaborator

Brent

Posted
Posted
On 1/20/2022 at 7:18 PM, GeneralT001 said:

I'm wondering what config you have in the stack with that GTN750Xi....I'm guessing there is just enough room for the GTN750Xi...Auto Pilot and maybe an Audio Panel?

Here's one. Truth is, I wasn't initially thrilled with the layout as I wanted the two NavComms and GFC 500 stacked in the center, but there was a clearance issue behind the panel. There are different ways to get all this done and I could have perhaps looked at something more creative, but in the end, this is working fine for me.  IMG_2381.thumb.jpeg.19aec53df5d45ec241478f325a63de79.jpeg

  • Like 1
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.