Jump to content

Recommended Posts

Posted

It’s finally time to fit the cowling to my bird. It’s been far too long to get to this point, but it’s finally happening. It’s much more carbon fiber than I first thought it would be and super light compared to the original. Time to see if it fits correctly. 
David

DC90268E-9110-497B-A9F7-9E5D4B14F085.jpeg

3D3D3EF2-6571-4E60-B22D-6F7CC9692B9E.jpeg

  • Like 17
  • Thanks 5
Posted
1 hour ago, Captnmack said:

Looks great but I’m a little confused...Is this different than then cowling that is being installed by the outfit in N. Carolina?

This is the cowling that I hope to have AGL Aviation as an installer. It’s been delayed in production for various reasons but is now ready for the first one to go on my 66 C model to check for fit. Thanks,

David

  • Like 4
Posted
12 minutes ago, Mcstealth said:

Sure, sure. We've heard this before. 

 

 

:):)

good luck. 

I know! It’s been killing me to keep waiting. It was painful being patient with my composite shop. They are extremely busy and good people are hard to find and keep. 

  • Like 1
Posted
46 minutes ago, Captnmack said:

But what is the difference in this cowling and the one that Bob put on his?

Bob’s original cowling was just modified. I changed the front 4 inches of the top cowl and the skin on the bottom cowl. This is a complete new cowling. Has a nicer look and fits many more airplanes than my first mod and  It’s quite a bit lighter than the original.

 

  • Like 1
Posted
13 hours ago, Sabremech said:

Bob’s original cowling was just modified. I changed the front 4 inches of the top cowl and the skin on the bottom cowl. This is a complete new cowling. Has a nicer look and fits many more airplanes than my first mod and  It’s quite a bit lighter than the original.

 

Please tell me a J is included in that statement!

Posted
12 minutes ago, Oldguy said:

Please tell me a J is included in that statement!

The plan is for this to be an FAA/PMA part for the J model. 

  • Thanks 2
Posted
19 hours ago, Sabremech said:

Bob’s original cowling was just modified. I changed the front 4 inches of the top cowl and the skin on the bottom cowl. This is a complete new cowling. Has a nicer look and fits many more airplanes than my first mod and  It’s quite a bit lighter than the original.

 

What's your seat of the pants guess in cruise speeds vs the 201 cowl?

Posted
35 minutes ago, rbridges said:

What's your seat of the pants guess in cruise speeds vs the 201 cowl?

I don’t want to get caught in the speed gain promise. Some airplanes will gain speed, most likely those that change from a stock cowling to the more aerodynamic cowling and some will not gain any. No rhyme or reason, just what I learned on the four airplanes I modified with my first cowling mod. Two airplanes gained speed while the other two did not. 
Thanks,

David

Posted
41 minutes ago, Sabremech said:

I don’t want to get caught in the speed gain promise. Some airplanes will gain speed, most likely those that change from a stock cowling to the more aerodynamic cowling and some will not gain any. No rhyme or reason, just what I learned on the four airplanes I modified with my first cowling mod. Two airplanes gained speed while the other two did not. 
Thanks,

David

I get it.  Just eyeballing pictures, your new cowl looks to be a huge improvement vs. stock.  

Posted

If this version of the cowl came with one of these as an option there would be a speed increase.

Clarence

312B5128-D50B-4F90-9B74-30D81278E112.jpeg

Posted
1 minute ago, M20Doc said:

If this version of the cowl came with one of these as an option there would be a speed increase.

Clarence

312B5128-D50B-4F90-9B74-30D81278E112.jpeg

I think that is only available in the XXL size of David's new cowl.

  • Haha 1
Posted
13 minutes ago, Yooper Rocketman said:

Or better yet, one of these.  
 

Tom

A83690BA-2094-4186-B2B5-2395225BD8BC.jpeg

There’s just no replacement for excess horsepower!

Clarence

Posted
On 3/28/2020 at 5:34 PM, Sabremech said:

It’s finally time to fit the cowling to my bird. It’s been far too long to get to this point, but it’s finally happening. It’s much more carbon fiber than I first thought it would be and super light compared to the original. Time to see if it fits correctly. 
David

DC90268E-9110-497B-A9F7-9E5D4B14F085.jpeg

3D3D3EF2-6571-4E60-B22D-6F7CC9692B9E.jpeg

I have a 74E just in case you need another test mule

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.