Jump to content

Recommended Posts

Posted

Hi fellow aviators. I need some help. What is/was the function of this red button seen just above the airspeed indicator in my 1980 M20J. Can't find anything in the POH or the maintenance manual so I assume that it served an aftermarket purpose. The placard next to it says F/T . It does not appear to have ever had a fuel flow meter or totalizer.

 

Thanks,

 

Todd

M20J panel.jpg

Posted

Jay,

You have a stall warning light? :)

 

Todd,

Be on the look out for what is attached to the JPI... some have the ability to remote mount an alarm...

Also, some have the ability to act as the FF/Totalizer...  see what exactly is the JPI model you have there... the numbers give a few details...

Expect such a well loaded IFR plane to have a back-up vac system... Be on the look out for anything Precise-flight related... 

Expect this to all be documented in you aircraft’s log books...

Pp thoughts only, not a mechanic...
 

Best regards,

-a-

Posted

Do you still have your ADF.  It is to reset your leg time back in the day during ADF approach.  

If you have an ADF, that button resets the flight timer in the ADF.  The ADF automatically starts to time a flight when you take off, so you have a "time in air" measurement for IFR purposes.  

  • Like 1
Posted

Flight timer for the ADF. Mine is located just below it, above the throttle. Actually quite handy once you realize it is there. Great for doing holds or timing turns.

Posted

Hmmmm...

F/T... Flight timer... :)

My King ADF has one, but didn’t get the luxurious button to go with it... have to reach all the way to the center stack to activate it...

Best regards,

-a-

Posted
3 hours ago, carusoam said:

Jay,

You have a stall warning light? :)

 

Oh my goodness, I was conflating the club Cherokee I used to fly and the Mooney! :rolleyes:

  • Like 1
Posted (edited)

THIS IS WRONG.  It resets the flight time (f/t) on the ADF.  I don't know what I was smoking.  Apologies.

mine looks the same and is labelled "F/T RESET" andvbit resets the totals in the fuel totalizer; make sure your JPI EDM does not have a fuel totalizer that replaced a factory FT-101.

Edited by tmo
Posted (edited)

Guys, 

Thank you so much! Sounds like the consensus is that it is connected to the leg time for the ADF. I am not sure I would have ever figured it out myself. Thanks for the help! I will be flying tomorrow so I will check it out with the Flight Time function.

 

Cheers,

Todd

Edited by fr8dog62
Posted
14 hours ago, anthonydesmet said:

Do you still have your ADF.  It is to reset your leg time back in the day during ADF approach.  

If you have an ADF, that button resets the flight timer in the ADF.  The ADF automatically starts to time a flight when you take off, so you have a "time in air" measurement for IFR purposes.  

@anthonydesmet is correct Resets Flight Timer on ADF on mine also

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.