Jump to content

Recommended Posts

Posted
4 hours ago, gsxrpilot said:

Put a HarborFreight winch on the back wall of your hangar/shed and drag the plane backward into the hangar

Do you just hook to the tail tie down loop?  Been thinking about this to make it easier to get over the door tracks.

  • Like 1
Posted

Is it safe for our planes?


Sent from my iPhone using Tapatalk

We apply several hundred tons of fert every year. It’s pretty corrosive.


Sent from my iPad using Tapatalk
  • Like 1
Posted

From the MSDS, corrosive to mild steel and only slightly to aluminum.  However it’s not like you are filling your plane with it to carry it somewhere like a fertilizer spreader.

A small amount sprinkled on the ramp to promote melting won’t hurt.  You won’t be driving your plane through any run off and splashing it everywhere.

Clarence

 

55F13896-44D5-4E68-838A-8F616C11294C.jpeg

Posted
5 hours ago, gsxrpilot said:

Put a HarborFreight winch on the back wall of your hangar/shed and drag the plane backward into the hangar. It seems the ice might only be causing issues for pushing the plane into he hangar?

If you do buy the winch, which work great by the way, first throw the cable away and buy the synthetic rope cable.. You will be glad you did.  I also added and extra length of strap for a safety measure.

Pritch

Picture0208181555_1[2072].jpg

  • Like 1
Posted
1 hour ago, JoeC said:

Do you just hook to the tail tie down loop?  Been thinking about this to make it easier to get over the door tracks.

I would want to be very gentle with it, but yes, that should work. If I was pulling hard, or up hill a distance, I'd create some sort of spreader bar and hook to the main gear.

Posted

I've actually used salt on the build up outside my hangar for years.  Worked great.  I'd put it out when the ice first formed, usually did the trick.  All I did was drag the aircraft out through it, I don't think it ever got on the airframe, and I flew that aircraft for a decade and never saw so much as a spot of corrosion.

That said, this was the built up outside the hangar door.  Taxiways were maintained clear.  If there is any more ice to get rid of than that a chat with the facilities manager is in order.

Posted
45 minutes ago, bradp said:

Jerry W over on the YouTube says water is a good deicing fluid. Yikes. 

If the temp is above freezing it is the best at getting frost off.  

Posted

A squirt bottle with isopropyl alcohol is safe for the painted surfaces, but of course not practical for the ramp area. I would not use the weed burner around it :D

  • Like 1
Posted
A squirt bottle with isopropyl alcohol is safe for the painted surfaces, but of course not practical for the ramp area. I would not use the weed burner around it 

Yeah I would hate to get that mixed up..... But then I would have the excuse to get a paint job!


Sent from my iPhone using Tapatalk
Posted

NASCAR uses something like that for blowing off the track. Maybe I can modify something


Sent from my iPhone using Tapatalk

Posted

not sure if you were looking for deice for ramp or plane.  we always used a 50-50 mix of cheap antifreeze in a garden sprayer for all the rental planes years back.  cheap and easy and washes off after a few snow-melt cycles.  Although hangar works well.  Moving to Florida works best for both ramp and plane.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.