removing brittain autopilit for sale

[Jerry Pressley]

complete brittain autopilot available  

[Jerry Pressley]

this is a mooney B6

[HRM]

Has it been underwater?

[Jerry Pressley]

no   never

[Jerry Pressley]

sitting yes   under water no

 

[Jerry Pressley]

you have one with altitude.  any idea what this one is worth?  jerryP

[Bob_Belville]

Jerry, if you haven't done so you might talk to Brittain in Tulsa. I suppose they have a waiting list of folks who would like an AP that Brittain could go through for them. Does your salvage plane still have the servos?

[Jerry Pressley]

it does but I have a few new ones for $100.   ALSO STEB SERVOS FOR 300

[Jerry Pressley]

This B4 gives the PC heading and radio psg couplers

[Dan 61]

Do you still have any of the Brittain servos/bellos left.  I have a B-5 and would like to get it running.

[88M]

Gents, is this autopilot still available? If not, do you know where I could get one?  Thanks!

[takair]

3 minutes ago, 88M said:

Gents, is this autopilot still available? If not, do you know where I could get one?  Thanks!

Does your plane have a PC as a starting point?

[carusoam]

Welcome aboard 88M...

The Market for Brittain auto pilot parts is very fluid...

The chance of something sitting on a shelf is slim...

But, you are in the right place asking the right questions...

Best regards,

-a-

[Jerry Pressley]

STILL HAVE IT.  JERRY 423 231 3491

[carusoam]

@88M see the note from Jerry above!

-a-

[Minnesota Mooney Guy]

I am making a "stab in the dark". I have a 1968 Mooney M20C will a Garmin 430 and an Accutrak II auto pilot which does a great job following my track on the Garmin. I would love to get an add on altitude hold parts and installation if that part of the equipment is available. I talked with Jerry of the Brittain company soon after the owner passed away and he was helpful in adjusting the equipment on the bench through an FBO he worked with but I have not found the equipment add on I need to do the altitude hold on the Brittain system. 

Anyone have the parts or suggestions? I have just about given up on this quest for alt hold on the system but here is one last try. 

[takair]

1 hour ago, Minnesota Mooney Guy said:

I am making a "stab in the dark". I have a 1968 Mooney M20C will a Garmin 430 and an Accutrak II auto pilot which does a great job following my track on the Garmin. I would love to get an add on altitude hold parts and installation if that part of the equipment is available. I talked with Jerry of the Brittain company soon after the owner passed away and he was helpful in adjusting the equipment on the bench through an FBO he worked with but I have not found the equipment add on I need to do the altitude hold on the Brittain system. 

Anyone have the parts or suggestions? I have just about given up on this quest for alt hold on the system but here is one last try. 

I have about 75% of a system listed under B5 for sale…in the classified section.  The altitude hold works…. but no tags.  The major missing part are the servos which I am holding on to…..but if you have patience you will find some.  Take a look and feel free to contact me for details.

[John Mensing]

On 5/12/2021 at 9:25 AM, Jerry Pressley said:

STILL HAVE IT.  JERRY 423 231 3491

Jerry, Do you still have the Brittain AP and servo's?   John 

mensingjohn@yahoo.com

[carusoam]

Welcome aboard John,

Jerry stops by every few days…

You might want to call his phone number… or Brent’s number that Jerry leaves around here often…

Best regards,

-a-

[Jerry Pressley]

still have   attaches to your existing brittain giving it heading and couplers

 

[carusoam]

On 3/28/2022 at 11:10 PM, John Mensing said:

Jerry, Do you still have the Brittain AP and servo's?   John 

mensingjohn@yahoo.com

Jerry just left you a response above…

-a-