'65 Mooney M20C Parts for Sale

[salty]

As most of you know, we had an off field landing in our Mooney last year. http://www.kathrynsreport.com/2022/01/mooney-m20c-n79396-incident-occurred.html

I acquired the salvage and have many parts available. I've begun the disassembly, and will be posting images of things that are available, but if you have need for a specific part, please reach out even if there is no picture for it. Initially, I will be asking for offers, but as time permits I will eventually put prices and better information on things. Any reasonable offers will be accepted. This is a bit of an "eating an elephant" situation, so I ask for patience and can't guarantee quick turnover, but if you need quick response I will try and prioritize your request.

None of the listed parts has damage from the accident. All were 100% operational on last flight, but have not been tested since. Sales are "as is".

More information or better pictures can be accommodated upon request.

KI-201C CDI

 

 

 

Mooney ASI

 

 

 

Mooney VSI

 

 

 

Mid Continent Altimeter

 

 

 

EGT Gauge

Gauge only, no probe

 

Electric Powered Vacuum Pump

 

 

Vacuum Pump

 

 

Vacuum System Parts

 

 

Mooney / Grimes Beacon

Worked when removed, but sounds like a coffee grinder.

 

 

14VDC to 26VAC Transformer

 

 

Voltage Regulator

For 50 Amp Generator

 

Suction Gauge

 

 

 

Nav Lights

 

 

Battery Box

 

 

Electrical Rack Shelves

 

 

Lower Cowl Induction System / Intake Filter

No damage

 

Coat Hangar

 

 

Rear Seat Flashing

 

 

Overhead Control Placards & Knobs

 

 

Control Rods Yaw & Pitch

 

 

Flight Enhancements Electric Step Actuator

 

 

Wing Root Fairing Right - PN 120001 - 6

 

 

Retractable Step

 

 

Aft Wing Fairing Right - PN 120000-10

 

 

Lower Cowl

No damage

 

Right Elevator

No damage, but some minor trailing edge imperfections

 

Door

Dent in top, but still seals perfectly

 

 

Upper Cowl

 

 

 

Tail Cone Access Panel - PN 913014-501

 

 

Misc. Access Panels

 

 

Avionics Access Panels

 

 

 

Cowl Cheeks

 

 

Airtex Carpeting

 

 

 

Plastic Interior Pieces

Some pieces have minor cracking, many are perfect

 

Mooney MAP & Fuel Pressure Gauge

 

 

 

Control Tube Ball and Socket Mooney P/N 710001

 

 

TO / GA Momentary Button

 

 

Control Yoke Shaft, Mooney P/N 720005 Left & Right

 

 

Pilot Side Yoke

PTT button in left thumb

 

Copilot Side Yoke

 

 

Original Mooney Gold Console placarding

 

 

Rapco Brake Lining 3 pair RA66-111

 

 

O-ring AN6230B-6 X 3

 

 

Control Yoke Tapered Pin, Mooney P/N AN386-1-10A, 2 used, 1 new

 

 

Yolk Assembly, Mooney P/N 710006

 

 

Brake Resevoir, Mooney P/N 850006-501 & Parking Brake Valve Asbly, P/N 4200-A1

 

 

Jack Shaft Assembly, Mooney P/N 710007 & Tubes P/N 915001

 

 

Bellcrank Assembly, Mooney P/N 914016

 

 

Gear Down Switch

 

 

Gear Down Lock Bracket, Mooney P/N 560046-501

 

 

 

Flap Handle, Mooney P/N 750006

 

 

Pilot side air vent eyeball, Mooney P/N #2120 & #1794

 

 

Radio Cooling Box, Mooney P/N 810036-1

 

 

Baggage Door

 

 

 

Main Gear Left & Right

There could be significant damage to some parts of this assembly due to the off field landing with gear down.

 

Mooney Brakes

 

 

Main Gear Wheel Assembly Left & Right

 

 

[C.J.]

PM sent. Interested in seats with leather covers

Thanks, C.J.

[MoonFlyer68]

I would like to be next in line for the seats if the previous guy falls through. Thanks

[jwarren2]

I sent you a PM. Thanks.

[salty]

Added wing levels parts and MAP / fuel pressure gauge

[DXB]

Hi - If you have them, I'd like to buy: (1) the complete adjustable cowl flap system (I do not need the flaps themselves) - I have a '68 where they were in fixed position and I want to convert them to adjustable.   (2) the metal duct tubes on each side that blow air on your feet on each side and are controlled by a butterfly valve near the end (the butterfly valves in mine a broken).  

[salty]

alas, the air handlers are already spoken for. I might have what you need for the cowl flap system, but I'm not certain it's all together. The cowl was already removed when I got the plane back. I'm pretty sure I have the knob and cable, and probably the pushrods. But, I think part of that system is integral to the engine mount, is it not?

[glbtrottr]

Md200-306, Tom 170c and indicator, and usb - pm me prices pls -


Sent from my iPhone using Tapatalk

[Fly Boomer]

16 minutes ago, glbtrottr said:

Md200-306, Tom 170c and indicator, and usb - pm me prices pls -


Sent from my iPhone using Tapatalk

@salty

[chriscalandro]

How much are those flaps?  Are they straight?

[salty]

3 minutes ago, chriscalandro said:

How much are those flaps?  Are they straight?

They appear to me to be undamaged other than normal wear and tear. Give me an offer.

[salty]

2 hours ago, glbtrottr said:

Md200-306, Tom 170c and indicator, and usb - pm me prices pls -


Sent from my iPhone using Tapatalk

I would greatly appreciate offers. I won't be offended, if we can't agree on value, then we both move on, no harm. I'm still disassembling and trying to organize this mess....

[salty]

Many new parts added to the OP.

[Caldwelldr]

I’m interested in the master brake cylinders. Please give my price & pictures.

Thanks!

Darrel

[Alan Fox]

Great job catalogging and photographing , BUT that downlock is SEVERELY worn , throw it in the trash.....   Carry on...

[Jerry Pressley]

down lock could only have paint problem.  I have half a dozen that look identical and only one has actual metal wear. 

[Weston]

Hey there, wondering if you have a few parts available? 

Flap master cylinder and slave cylinder 

Brake master cylinder 

Steering horn and components

Many thanks.  

W 

[salty]

Yes, with exception of the flap  cylinders

[Weston]

Hey there, what is the best way to organize getting this done and maybe pics of brake cylinders and steering horn/components?  I dont know how to do private messages on here?  

I have a fellow named Joyce Ashiow emailing and calling from a Google Voice number… I was getting the feeling that is a scammer, but please let me know if it is you:)

Many thanks.  W 

[TheAv8r]

@salty The handle on my baggage door has seen better days... yours looks really good in the pic. Would you be up for taking the handle off and selling?

[salty]

I would prefer to sell the whole door. Or the door whole. Whichever is more correcter.

[TheAv8r]

2 hours ago, salty said:

I would prefer to sell the whole door. Or the door whole. Whichever is more correcter.

Door whole makes me think of something else... Haha can definitely understand that. If you change your mind, feel free to shoot me a PM. 

[Alan Fox]

On 5/11/2023 at 12:20 PM, Jerry Pressley said:

down lock could only have paint problem.  I have half a dozen that look identical and only one has actual metal wear. 

Its trashed , Its shaped like an egg , Throw it in the trash, Or give it to Jerry....

 

[Sabremech]

48 minutes ago, Alan Fox said:

Its trashed , Its shaped like an egg , Throw it in the trash, Or give it to Jerry....

 

I agree with Alan. This downlock block is a gear collapse waiting to happen. It’s quite worn. 

[chriscalandro]

On 6/10/2023 at 9:58 AM, Sabremech said:

I agree with Alan. This downlock block is a gear collapse waiting to happen. It’s quite worn. 

Good news is I have a set of up/down lock blocks should someone want them.