MtPleasantFlyer Posted February 7, 2014 Report Posted February 7, 2014 What tire pressure do you fill your tires? Does the temp change dictate what you look for? How about weight? How often do you gauge it and not just kick it? Nitrogen or air? Favorite brands? Quote
markm20b Posted February 7, 2014 Report Posted February 7, 2014 Back when I was racing I used nitrogen but for trail/street riding I use good old air. I run around 15psi while trail riding. I find if I go lower I end up with pinch flats. I run between 23 and 28 while running in the twisties and 32 to 35 while running on the freeway. The higher presures will help your tires last longer while on the pavement. I have a small electric pump that I carry in my pack. Just a second.... this is the Mooney forum, not the offorad riding forum I also read I use air and 35 for the rears and 45 for the front on my M20B. Mark Quote
TWinter Posted February 7, 2014 Report Posted February 7, 2014 30 lbs. as tire indicates. Weather dictates how often, usually end up checking 3-4x a year depending on temps. If it looks low, check it. Might have picked something up (there were three incidents of flats at our field this year). I use manufacturer PSI regardless of weight. Nitrogen or air?, I always use air since I have a compressor in my hanger. I know nitrogen helps keep the tire pressure consistent for vehicles, not sure how many FBOs or service centers have access to it, also not sure about aviation aspect of nitrogen if any. Quote
yvesg Posted February 7, 2014 Report Posted February 7, 2014 Service centers put nitrogen in oleos so most do have it. yves Quote
gjkirsch Posted February 7, 2014 Report Posted February 7, 2014 49 pounds front tire, 42 Pounds for tires under the wing. Keep an aircompressor in the hanger and check monthly. Put on the Hubba Hubba wheel covers to make it easier to check. Bravo's are heavy. Quote
Sabremech Posted February 7, 2014 Report Posted February 7, 2014 For my C model , 30 psi all around. I check them before every flight and since it has a tube, air is fine. 2 Quote
Dave Marten Posted February 7, 2014 Report Posted February 7, 2014 Monthly. I'll use my compressor in the hangar to add a little air when needed. Use the POH tire pressures for your specific model not the max rating number on the sidewall or the numbers your longbody friends are using. (I think the M20C is 30 PSI on all three, but verify with your POH). Good read here: http://www.goodyearaviation.com/resources/pdf/aircraftmanual.pdf Avoid the $0.99 auto store tire gauges. Spruce has a decent gauge for $18 http://www.aircraftspruce.com/pages/to/gauges_tire/tiregauge.php If you've got easy access to hangar buddy or FBO with a nitrogen bottle then go for it. If not then don't sweat it just give it a squirt of air. Note: as BigTex pointed out, if you now have 6 ply tires on your short body then you can run the 6 ply tires up to full rated pressure 42 mains/49 nose like the long bodies. 1 Quote
carusoam Posted February 7, 2014 Report Posted February 7, 2014 Newish rubber tube technology helps keep the air in them much longer. If you have very old tubes, look into what's available today. Making sense? My O can go months without adding air, my C was a monthly affair.... Best regards, -a- Quote
Bob_Belville Posted February 7, 2014 Report Posted February 7, 2014 My E is 30 psi in nose and mains. I check it about monthly or before a trip. I have a little battery powered compressor in the hanger. Quote
ncdmtb Posted February 7, 2014 Report Posted February 7, 2014 30psi on my E too. Visual check with every preflight. Check actual pressure infrequently/as visual check warrants. Sent from my iPad using Tapatalk Quote
Buster1 Posted February 7, 2014 Report Posted February 7, 2014 Check out this webinar on tires. It is really good and I learned waaay more than I thought I would. Turns out proper inflation is pretty important, and you need to add a touch more (4% IIRC) if you're inflating while she's "on her feet." http://www.eaavideo.org/video.aspx?v=1620037881001 1 Quote
Marauder Posted February 7, 2014 Report Posted February 7, 2014 My E is 30 psi in nose and mains. I check it about monthly or before a trip. I have a little battery powered compressor in the hanger. Bob -- is the 30 PSI specified in the POH for the E models? I thought all Mooney nosewheels were 49 PSI. Quote
aaronk25 Posted February 7, 2014 Report Posted February 7, 2014 40 in mains.......30lbs isn't enough even though thats what it calls for. If the plane is filled up with fuel go push it with 40vs30 once and you will see there is a big difference. Aaron Quote
mooniac15u Posted February 7, 2014 Report Posted February 7, 2014 Per the maintenance manual on page 1-5: For C,D,E, and F the mains are all 30 psi. For C,D, and E the nose is also 30 psi. For the F the nose is 49 psi. 1 Quote
MtPleasantFlyer Posted February 7, 2014 Author Report Posted February 7, 2014 30 lbs. as tire indicates. Weather dictates how often, usually end up checking 3-4x a year depending on temps. If it looks low, check it. Might have picked something up (there were three incidents of flats at our field this year). I use manufacturer PSI regardless of weight. Nitrogen or air?, I always use air since I have a compressor in my hanger. I know nitrogen helps keep the tire pressure consistent for vehicles, not sure how many FBOs or service centers have access to it, also not sure about aviation aspect of nitrogen if any. Most jets are required to use Nitrogen. I do have a couple friends who have their own nitrogen bottle for their tires. Supposed to be more stable, seaps less. 1 Quote
orionflt Posted February 7, 2014 Report Posted February 7, 2014 For my C model , 30 psi all around. I check them before every flight and since it has a tube, air is fine. If your running 6 ply on the nose tire you can bump it up to 49, 4 ply is 30. I have 6 ply on the nose and have tried booth and i like 49 for the nose. Quote
Hank Posted February 7, 2014 Report Posted February 7, 2014 I run Owners Manual tires on my C, and keep all three inflated to 30 psi per the book. Seems the nose is 5.00 x 5, but I don't recall the number of plies. Strange, since I just replaced it in December. Hopefully the leak stop tube in the nose will work as well as the ones on the mains. Nothing helps, though, when temps fall from almost 60F to -8F in 36 hours. Quote
Seth Posted February 7, 2014 Report Posted February 7, 2014 Bob -- is the 30 PSI specified in the POH for the E models? I thought all Mooney nosewheels were 49 PSI. +1 30 Mains, 49 nose Quote
Seth Posted February 7, 2014 Report Posted February 7, 2014 40 in mains.......30lbs isn't enough even though thats what it calls for. If the plane is filled up with fuel go push it with 40vs30 once and you will see there is a big difference. Aaron I'm curious if that will make a difference with the Missile and the higher gross weight. Maybe I'll try that this spring when I can not freeze when working around the airplane. -Seth Quote
aaronk25 Posted February 7, 2014 Report Posted February 7, 2014 I'm curious if that will make a difference with the Missile and the higher gross weight. Maybe I'll try that this spring when I can not freeze when working around the airplane. -Seth Found out the hard way in MN I can't push it in the hanger unless there aired up there Is a huge amount more resistance. I'm guessing your missile would be worse especially if you have long range tanks that are full. Quote
mikesalman Posted February 8, 2014 Report Posted February 8, 2014 I also heard you can pick up an extra 5 knots with the tires properly inflated. 1 Quote
Bob_Belville Posted February 8, 2014 Report Posted February 8, 2014 Bob -- is the 30 PSI specified in the POH for the E models? I thought all Mooney nosewheels were 49 PSI. Owner's Manual for 1966 Super 21, (revised Nov. 1965) page 30: "The tire pressure (nose and Main) should be maintained at 30 psi." Quote
BigTex Posted February 8, 2014 Report Posted February 8, 2014 Owner's Manual for 1966 Super 21, (revised Nov. 1965) page 30: "The tire pressure (nose and Main) should be maintained at 30 psi." The real question, do you follow the tire manufacture or the Aircraft POH. If you follow the POH, You'll need to alos follow the tire specs as well (i.e., tire ply). If you review the Goodyear data book, tire pressure ratings are really dependent on the size and number of plys among other factors. If you use 4 ply tires on the mains and the nose wheel, 30 psi is correct (29 mains, 31 nose wheel). Back in 1966, that's likely what rolled off the line. However, if you upgrade to 6 ply all the way around, Goodyear recommends you inflate to 42 on the mains and 50 on the nose wheel. http://www.goodyearaviation.com/resources/pdf/db_airdatabook.pdf 1 Quote
Dave Marten Posted February 8, 2014 Report Posted February 8, 2014 Excellent point Gary! If you have ditched the 4 ply tires and are running 6 ply on your vintage Mooney then go ahead and run em up to the 42/49 numbers! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.