Power boost door bolt

[Dieselsnplanes]

Where do I find the bolt that holds the cable for the power boost door? It broke when I was putting the lower cowling back on and I can’t find anything listed for it. I have to leave on the 23rd and I’m a little worried. I attached a picture

[A64Pilot]

I believe it would be easy to make.

[Guest]

It’s actually supposed to be a special bushing, a stud, washer and castle nut.

Clarence

[N201MKTurbo]

https://www.mcfarlaneaviation.com/products/product/MCS2323-1/
 

if this one isn’t quite right, they have a lot of different kinds.

I make my own by putting the bolt in a machinists vise and drilling the hole with a 1/16 inch end mill.

[Guest]

I believe that this is the one.

[Dieselsnplanes]

On 6/18/2022 at 8:49 PM, N201MKTurbo said:

https://www.mcfarlaneaviation.com/products/product/MCS2323-1/
 

if this one isn’t quite right, they have a lot of different kinds.

I make my own by putting the bolt in a machinists vise and drilling the hole with a 1/16 inch end mill.

That’s it! Thanks!!

 

it appears to be an AN bolt someone just drilled

[Fly Boomer]

3 hours ago, Dieselsnplanes said:

it appears to be an AN bolt someone just drilled

Yep, and a bolt is just a piece of steel that had a head forged onto it, was threaded, and then heat treated.  Easy-peasy.