John Pleisse Posted February 19, 2014 Report Posted February 19, 2014 A&P's hate us for it, but the first thing a pilot looks at is the paint job, second, the panel. Please post your pix and show what great care you have taken. Modern panels and modifications are abound. Make this the longest thread we have! (looking for my pix now) EDIT: This should not be a expose of deep pockets. On BeechTalk, everyone posted panels....old, new, modified or other. This is very valuable because we can all see original stock, installation of things like AOA indicators, panel paint and powder coating, placarding options, switch covers, STC switches, yoke covers, Ipad and Ram Mounts, install options, GEM's and placement. We may be able to help each other out quite a bit. I have seen autopilots put in the wrong place, announciators put in the wrong place, etc. Post 'em....... ALL. Quote
John Pleisse Posted February 19, 2014 Author Report Posted February 19, 2014 Air Mod in Robinsonville, NJ. Modest paint and clean up of a 201 panel. New placarding and switch covers recovered in black. Modest, simple and evolves the panel. 3 Quote
co2bruce Posted February 19, 2014 Report Posted February 19, 2014 Ok I'll bite. Here's the panel in our 99 Eagle. We love the layout. 3 Quote
rainman Posted February 19, 2014 Report Posted February 19, 2014 Here's the panel on my 1979 231, everything works, done by Crystal Avionics in New Braunfels TX. Ray 3 Quote
MooneyBob Posted February 19, 2014 Report Posted February 19, 2014 Here's the panel on my 1979 231, everything works, done by Crystal Avionics in New Braunfels TX. Ray That's very nice. Quote
Marauder Posted February 19, 2014 Report Posted February 19, 2014 John -- you know where this is going to lead. We post all our nice pictures and then Bob & Bennett post their's and we go into a state of depression 4 Quote
jetdriven Posted February 19, 2014 Report Posted February 19, 2014 Non-common place for the engine monitor but I really like that, Marauder. Quote
Wakeup Posted February 19, 2014 Report Posted February 19, 2014 Holy cow!!! If anyone is in the Chattanooga area I would love to go for a ride in your "I'm not worthy panels". Very impressive!! Strong work!! Quote
Marauder Posted February 19, 2014 Report Posted February 19, 2014 Non-common place for the engine monitor but I really like that, Marauder. Thanks Byron. When my mechanic was working up the new right side panel, we experimented with it above the transponder. To really keep it in line of sight, we had to use angling of the unit which I didn't like. I'm looking at a Bendix King 770 to replace my Narco, so all this will change once again when I move forward with it. I have been also looking at the new EI primary as a possible replacement for the JPI. So who knows what it will all look like when I am done... Quote
M20F-1968 Posted February 19, 2014 Report Posted February 19, 2014 Did someone say something about "modern avionics abound?" It was a long time coming, so long that this panel went through several prior versions with design changes as new equipment was introduced. Paint was completed in Dec, 2013. Interior is just being completed. John Breda 6 Quote
M20F-1968 Posted February 19, 2014 Report Posted February 19, 2014 Here's the rest of the story: John Breda Quote
Ned Gravel Posted February 19, 2014 Report Posted February 19, 2014 Here's the rest of the story: John Breda John: Is it me, or do I see the edges of a wind generator bolted to the inside of your battery access panel? The BAE 14/28? Quote
Marauder Posted February 19, 2014 Report Posted February 19, 2014 Did someone say something about "modern avionics abound?" It was a long time coming, so long that this panel went through several prior versions with design changes as new equipment was introduced. Paint was completed in Dec, 2013. Interior is just being completed. John Breda I forgot all about your plane John. I remember when I first saw pictures of it and it took a while for me to realize that it was an F! Nicely done! Sent using Tapatalk Quote
Bob_Belville Posted February 19, 2014 Report Posted February 19, 2014 John Breda, great panel! It looks like you increased the panel height by quite a bit to put the STec and the JPI annunciator above the GTN750. Can you see over the top? Quote
rbridges Posted February 19, 2014 Report Posted February 19, 2014 John -- you know where this is going to lead. We post all our nice pictures and then Bob & Bennett post their's and we go into a state of depression haha. ain't that the truth. Quote
Oscar Avalle Posted February 19, 2014 Report Posted February 19, 2014 John -- you know where this is going to lead. We post all our nice pictures and then Bob & Bennett post their's and we go into a state of depression Image003.JPG DSCF0169.JPG DSCF0160.JPG DSCF0425.JPG Jajaja, indeed Quote
Marauder Posted February 19, 2014 Report Posted February 19, 2014 Here is mine... I forgot all about Oscar's panel! Another beauty! Oscar -- what is the warning light above the Gear Up light? Looks like it says "Lasar Warning". 2 Quote
Oscar Avalle Posted February 19, 2014 Report Posted February 19, 2014 Jajaja. May be I should participate more often so you don't forget about us in exile... The warning light is for a LASAR ignition system. I installed the system several years ago. It was developed by UNiSON, then it was bought by Champion but now it is somehow orphan. The main advantage I see is that I have an electronic ignition, but still the two magnetos as a back up. In terms of performance I have not sen any gains at all. 1 Quote
John Pleisse Posted February 19, 2014 Author Report Posted February 19, 2014 BeechTalk has a similar thread, so I take no credit. There's is over 80 pages. Let me be clear, be proud of what you got, even if it is not glass. I noticed this on BT, too. All panels, new and old. All paint, classic or new. Let's see and document our fleet. EDIT: This should not be a expose of deep pockets. On BeechTalk, everyone posted panels....old, new, modified or other. This is very valuable because we can all see original stock, installation of things like AOA indicators, panel paint and powder coating, placarding options, switch covers, STC switches, Ipad and Ram Mounts, install options, GEM's and placement. We may be able to help each other out quite a bit. I have seen autopilots put in the wrong place, announciators put in the wrong place, etc. Post 'em....... ALL. 2 Quote
Oscar Avalle Posted February 19, 2014 Report Posted February 19, 2014 BeechTalk has a similar thread, so I take no credit. There's is over 80 pages. Let me be clear, be proud of what you got, even if it is not glass. I noticed this on BT, too. All panels, new and old. All paint, classic or new. Let's see and document our fleet.[/quot Yes, let's do it! Great idea Quote
KSMooniac Posted February 19, 2014 Report Posted February 19, 2014 Great thread idea! Sorry I don't have a better full-panel shot, but this will have to do for now. I'm anxious to add a glass PFD, but will have to wait until after the engine overhaul is digested. I'm hoping the relaxation of part 23 rules might lead to more (and cheaper) options for us soon too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.