Looking for a Manifold/Fuel Pressure Gauge for a 1966 Mooney M20C

[hammdo]

I’m looking for one just in case my A&P discovers mine is going out.

If you’ve removed one for new JPI etc. let me know…

-Don

[hammdo]

@Alan Fox or @Jerry Pressley if you have one, let me know…

Thanks!

-Don

[Jsno]

I just  had mine repaired by Consolidate Instruments in Teterboro, NJ.  You can have it repaired as opposed to overhauled for less money.  Took a couple of weeks for them to get to it but then they fixed it in a day.

[hammdo]

I was looking at that for mine but wanted to limit down time if I can. May have to do that if we find that it’s the problem…

-Don

[PeteMc]

I guess this is the time for MP/FF or FP gauges to fail.  Someone else (guess on FB) was just asking.  Mine failed recently and I could not find a replacement or parts anywhere.  Someone told me about Aerospace Logic.  They have MP/FP (also MP/FF) gauges.  A couple of gotchas to be aware of:

Transducer: The device can only be installed with THEIR transducer, so if you have a JPI or any other device with Fuel Flow you CANNOT piggyback on their transducer.  My mechanic put in an extra log piece of fuel line and put my old transducer inline and did some fuel flow tests and signed off on it.  Long line was to make sure there were no flow issues to mess up the other transducer.

Dimmer: The unit was originally certified for DAY VFR so they never installed a photocell or any dimming capability.  And it is VERY bright.  So if  you do go with them, be sure to get their optional Dimming Package for a few extra bucks. 

https://www.aerospacelogic.com/engine-instruments/fuel-and-manifold-pressure/

[C.J.]

On 11/11/2023 at 2:20 PM, hammdo said:

I’m looking for one just in case my A&P discovers mine is going out.

If you’ve removed one for new JPI etc. let me know…

-Don

 

@hammdo I have one. Message sent.