Carb temp probe installation

[bcg]

Does anyone have a picture of how the carb temp probe goes in? I'm putting an EDM 930 in right now and there aren't any instructions for how to install the carb temp probe.

 

Sent from my Pixel 6a using Tapatalk

 

 

[7.Mooney.Driver.0]

Temp sensor gets installed on the front of the carburetor.


Sent from my iPhone using Tapatalk

[Aerodon]

All the ones I have done - remove the small setscrew on the font side of the carb and replace with the probe.  I don't think the thread pitch of the JPi probe and the setscrew are the same but it works. Maybe epoxy it in to be safe?

 

Aerodon

 

 

[bcg]

Temp sensor gets installed on the front of the carburetor.


Sent from my iPhone using Tapatalk

Thanks, that's helpful.

Sent from my Pixel 6a using Tapatalk

[bcg]

All the ones I have done - remove the small setscrew on the font side of the carb and replace with the probe.  I don't think the thread pitch of the JPi probe and the setscrew are the same but it works. Maybe epoxy it in to be safe?
 
Aerodon
 
 

Thanks. I sent you a PM about a panel.

Sent from my Pixel 6a using Tapatalk