WTB Aspen EA100 Interface box

[0TreeLemur]

I found one.  

Also got a PM from some rando with 0 post history saying "My dad has of those things- here's his e-mail:"   Reminder that scammers lurk here...

 

Edited February 18, 2023 by 0TreeLemur
warning for scammer action

[ZuluZulu]

You might try BeechTalk also.  A quick search showed ones were posted in February, July, and September of last year.

[carusoam]

See what @Alan Fox has on the shelf…. (EA100 box)

-a-

[0TreeLemur]

19 hours ago, ZuluZulu said:

You might try BeechTalk also.  A quick search showed ones were posted in February, July, and September of last year.

Not presently.

[LANCECASPER]

On 2/6/2023 at 4:03 PM, 0TreeLemur said:

Anyone have one of these in serviceable condition laying around after a Garmin Glass upgrade?  I'm looking for one. The EA100 interface box connects the digital attitude output from the Aspen EDF1000 to the analog attitude input of a B-K autopilot system.  If you removed an Aspen and a B-K autopilot for a panel upgrade, you might have one of these boxes.  I'm looking for one because I think the one in my J is acting up.

Thx.

Fred

 

An Aspen dealer should be able to get you an exchange price on an EA-100 from Aspen, then you have a warranty. Back in 2020 the dealer list exchange price on an EA-100 was $1174. Also they can make sure that the Aspen-spec shielded ethernet cable was used in the install. That has been one point of failure and it might end up being just the cable.

@Andy Smith from Aspen may be able to help

[0TreeLemur]

I've located one from another MS member!  Yea!

[Alan Fox]

i have one

[LANCECASPER]

On 2/11/2023 at 1:32 PM, 0TreeLemur said:

I've located one from another MS member!  Yea!

Make sure that you have the most up to date firmware installed

[0TreeLemur]

6 hours ago, LANCECASPER said:

Make sure that you have the most up to date firmware installed

I'm new to the Aspen universe.  Is that something I can do, or a dealer/factory task?   Thanks.

[LANCECASPER]

9 hours ago, 0TreeLemur said:

I'm new to the Aspen universe.  Is that something I can do, or a dealer/factory task?   Thanks.

The dealer must do that - that's one of the reasons that a Aspen exchange unit might be best. It would have the latest software already and if that doesn't solve it you won't be out the money for the EA-100.

Also to repeat what I mentioned earlier, Aspen strongly recommends that if their special doubled-shielded ethernet wiring wasn't used in the installation,  that the current wiring be replaced with theirs' if someone is having EA-100 issues.