Jump to content

where can I get spacers for engine mounts?

rbridges

By rbridges
in General Mooney Talk

 Share

Recommended Posts

rbridges Grand Master

rbridges

Posted
Posted

I'm looking for mooney part #600364-003 and -001.  These are the washers used to shim the engine mounts.  I guess I can call the MSC in Rome, but I didn't know if anyone knew where they are readily available.  Google is coming up empty, and searching on this forum isn't really helping a lot, either.


Thanks.

mooney2201 Collaborator

mooney2201

Posted
Posted

there is a trick to putting shims in..they have thin spacers and thick 32nd and 64th inch.....on 2 of the shims thick and two thin,,,,make a cutout all the way through the shim approx 1 inch,,,,this way you can slide the shim in just loosen engine mount,,,add thick or thin shim..put on the cowling bolt it up and see which corner mount will move the spinner in the exact position..to line up with cowling.... really very easy job you will need an engine hoist to move engine in certain positions

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.