Jump to content

Garmin 430 WAAS with GA36 Antenna w/ backing plate

Old Chub

By Old Chub
in Avionics / Parts Classifieds

 Share

Recommended Posts

Old Chub Community Regular

Old Chub

Posted
Posted

430 WAAS that was removed from a new aircraft for GTN upgrade.  Less then 20 hours run time on the unit.  

I have previously sold two of these to two different MS members.  Not a scratch on the face or screen.

$4,500 for 430, GA36 and manuals

  

 

IMG_2995.JPG

IMG_2996.JPG

IMG_2994.JPG

carusoam Grand Master

carusoam

Posted
Posted

Currently viewed by my iPad..

Great price for a near new device capable of the most modern approaches...

Now to clean up all the drool on my iPad...

:)

-a-

robert7467 Proficient

robert7467

Posted
Posted

I bought one from him and it was a brand new unit. Upon inspection, the switch was damaged in shipping. Without hesitation, he sent me another unit that was practically brand new. I would definitely do business with OldChub again! Overall a perfect transaction!

  • Thanks 1
Nokomis449 Collaborator

Nokomis449

Posted
Posted

Assuming the voltage is the same, yes.  If the existing GPS antenna is non-WAAS, you'll need to install the WAAS antenna and possibly replace the antenna cable also.  I'm going from memory from several years ago when I removed my non-WAAS 430 and replaced it with an Avidyne IFD440.  Also had to replace the non-WAAS antenna at that time.

tmo Veteran

tmo

Posted
Posted

Also possibly antenna cable might need to be redone, if the old one is crap. If you end up pulling a new cable, just do RG400.

Mike A Rising Star

Mike A

Posted
Posted

What am I looking at install-wise if I already have a 430W and want to add another as second as COMM/NAV2?  Can I split the signal from the already installed antenna?  I assume the install labor would be significantly less than the initial one’s was. 

Old Chub Community Regular

Old Chub

Posted
  • Author
Posted

I guess to be perfectly legal it would have to be allowed in the STC for installation.   I was working on a L3 Lynx transponder last week and I noticed that it talked about splitting the GPS signal in the installation manual.  

Old Chub Community Regular

Old Chub

Posted
  • Author
Posted

Sorry Robert I sold the units I had.   Will let you know if I run across any additional units.  

Warren 

 

  • Like 1
robert7467 Proficient

robert7467

Posted
Posted

Chub, do you still have that first unit you sent? That was a very nice unit and you can send it in for a flat rate repair. Other than the know that was a perfect unit.

 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.