CosmoAir Posted June 24, 2019 Report Posted June 24, 2019 We just updated the panel on our M20J (N55LL) with a new engine monitor and replaced the panel switches/breakers with separate switches and breakers at the same time. The removed switches/breakers were all working when removed and are available for $150 each. Quote
carusoam Posted June 28, 2019 Report Posted June 28, 2019 Welcome aboard Cosmo. If you have part numbers, that can be helpful. Got a pic of your updated switches? Best regards, -a- Quote
CosmoAir Posted June 28, 2019 Author Report Posted June 28, 2019 The 5 with the broader screw plates are the original ETA 41-P10-F10-RS02 parts. I assume the master is original, but I don’t have a part number. The 2 with the narrow screw plates are Klixon 20TC2-BA-10-16xx switches. The new replacement switches look very similar, but are lighted and the breakers are now separate. I added a picture of the left side panel as is was nearing completion at Muncie Aviation in April. 2 Quote
NotarPilot Posted June 30, 2019 Report Posted June 30, 2019 LIGHTED SWITCHES!!!! PMA'd? TSO'd? Prey tell! Where did you get them? How much? Details please. Quote
TomThrall Posted July 29, 2019 Report Posted July 29, 2019 I send a message, would like to buy the Pitot Switch from you. thanks Tom Quote
CosmoAir Posted July 30, 2019 Author Report Posted July 30, 2019 Tom, We recently sold the entire set to someone who had just bought his Mooney and one of his switches failed. He decided if one failed then others were likely to follow. Best of luck on finding a source. Quote
carusoam Posted July 30, 2019 Report Posted July 30, 2019 3 hours ago, CosmoAir said: Tom, We recently sold the entire set to someone who had just bought his Mooney and one of his switches failed. He decided if one failed then others were likely to follow. Best of luck on finding a source. Cosmo, You can edit your title with the word Sold at the front... keeps people from being entrapped... Tom, New switches with the proper labels can be found at places like Aircraft spruce... Best regards, -a- Quote
PTK Posted July 30, 2019 Report Posted July 30, 2019 11 hours ago, TomThrall said: I send a message, would like to buy the Pitot Switch from you. thanks Tom You can find the switches. Lasar had them. Not worth paying 150$ for used switches when you can pay a little more for new! Quote
Emmet Posted July 30, 2019 Report Posted July 30, 2019 The 5 with the broader screw plates are the original ETA 41-P10-F10-RS02 parts. I assume the master is original, but I don’t have a part number. The 2 with the narrow screw plates are Klixon 20TC2-BA-10-16xx switches. The new replacement switches look very similar, but are lighted and the breakers are now separate. I added a picture of the left side panel as is was nearing completion at Muncie Aviation in April. Can you tell us a little bit more how you got these installed ? Dreaming about lighted switches for a long time .... Quote
CosmoAir Posted August 1, 2019 Author Report Posted August 1, 2019 Emmet, When we updated our engine monitor to a JPI 930 it didn’t fit into the existing panel. Muncie Aviation laid out the new panel to include using non-breaker switches usually used on a Piper panel. Yes they are lighted, but no they don’t have built in breakers like the original Mooney switches. We added breakers on the right hand side, one for each switch. The new switches were relatively inexpensive compared to the cost for the two Mooney switches we have replaced in years past. The new switches are slightly larger than the ones they replaced, making it difficult, if not impossible to replace them one at a time. Quote
LANCECASPER Posted July 4, 2022 Report Posted July 4, 2022 39 minutes ago, Jay G said: Please contact me about these. Thanks. Call if possible. 702-682-6582. Jay That ad was 3 years old. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.