N601RX Posted May 21, 2014 Report Posted May 21, 2014 These were recently removed for a new engine monitor in my plane. If anyone needs more info about a particular one let me know and I'll get it for you. Removed from 67F. If anyone needs one or just wants a spare let me know. Newer fuel level gauge. This is a slide in replacement sigma tech gauge for the original garwin gauge. It reads correctly at empty, 1/2 and full when hooked to a resistance decade box. $125. Oil pressure gauge. Reads correctly across its range when connected to certified master gauge $75 Manifold pressure gauge working fine when removed $125 Tach cable $30 Tach- matched jpi pretty closely at most speeds $100 Factory cht sensor $20 Factory oil temp sensor $20 Thanks Mike Sent from my iPad using Tapatalk HD Quote
Marauder Posted May 21, 2014 Report Posted May 21, 2014 You're missing one picture -- the one with your new panel additions! Sent using Tapatalk 4 Quote
MB65E Posted May 21, 2014 Report Posted May 21, 2014 Hi Mike! Do you have your oil pressure sending unit available? I'm at a bit of a loss with ours... it's acting up, holds pressure on the ground with the engine off. I have the STC'd 201 panel but the guys at "PMA products" that manufacture the p/n sending unit I have say that it was never used in an E model but it was approved on the 201 itself... I'm ready to go to my national aircraft parts association. Better yet, grab my spare Bosch one out of the 944! -Matt Quote
N601RX Posted May 21, 2014 Author Report Posted May 21, 2014 Chris, Sorry no pictures yet, its still a work in progress. Hopefully I will be finished in another week or so.  Matt, Sorry but my oil pressure gauge is a mechanical gauge with the oil line ran to the back of it. Quote
orionflt Posted May 21, 2014 Report Posted May 21, 2014 Chris, if you don't mind me jumping in on your thread, I did the same (MVP-50) and have most of the same parts available (no nulites), I will use the same price structure as chris except i will add 5 bucks to his price so i won't compete with him I will start my own thread later and post pics. Â Brian Quote
Marauder Posted May 21, 2014 Report Posted May 21, 2014 Chris, if you don't mind me jumping in on your thread, I did the same (MVP-50) and have most of the same parts available (no nulites), I will use the same price structure as chris except i will add 5 bucks to his price so i won't compete with him I will start my own thread later and post pics. Brian No problem Brian! It's not my thread, it's Mike's Sent using Tapatalk Quote
DaV8or Posted May 21, 2014 Report Posted May 21, 2014 Chris, if you don't mind me jumping in on your thread, I did the same (MVP-50) and have most of the same parts available (no nulites), I will use the same price structure as chris except i will add 5 bucks to his price so i won't compete with him I will start my own thread later and post pics.  Brian  And if you do that, I'll start another thread to compete with yours!  I have all the same stuff, plus a King KX-125 with tray. Quote
orionflt Posted May 21, 2014 Report Posted May 21, 2014 looks like we are flooding the market..sorry mike  Quote
KSMooniac Posted May 21, 2014 Report Posted May 21, 2014 looks like we are flooding the market..sorry mike   Yeah, nobody buy these things because I'm going to sell a lot of the same stuff soon too!  Quote
Marauder Posted May 21, 2014 Report Posted May 21, 2014 All you guys did was confirm that it's a buyer's market. I'll give $50 for the KX-125 Sent from my iPad using Tapatalk Quote
Hank Posted May 21, 2014 Report Posted May 21, 2014 Mike -- I'll take the Nulites. If you're around, I'll even come get them. --Hank Quote
planebones Posted May 28, 2014 Report Posted May 28, 2014 I am needing an EGT set up and any spare 760 channel radios. Thanks Ken 307-699-0087 Quote
N601RX Posted June 7, 2014 Author Report Posted June 7, 2014 Updated - removed things that have sold and added a few others. Quote
N601RX Posted June 10, 2014 Author Report Posted June 10, 2014 I'll take the fluke meter!!! Lol. -Matt One of the benefits of the job, It's came in handy many times. Quote
FloridaMan Posted June 10, 2014 Report Posted June 10, 2014 Is that MP/FP gauge still available? Quote
KSMooniac Posted June 10, 2014 Report Posted June 10, 2014 Is that MP/FP gauge still available?  I have the same gauge available if Mike's is already sold... I just haven't made my listing yet.  (I'm waiting for his stuff to sell before I list!) Quote
N601RX Posted June 10, 2014 Author Report Posted June 10, 2014 Yes I still have it. Sent you a pm. Quote
furledd Posted December 5, 2014 Report Posted December 5, 2014 Did either of you have a slide in Garwin Oil Temp Gauge available? Quote
N601RX Posted December 5, 2014 Author Report Posted December 5, 2014 No, all I have left is a oil pressure and fuel level. They both read correctly and the fuel gauge is only a few years old. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.