Fly Boomer Posted June 11, 2022 Report Posted June 11, 2022 3 hours ago, PJClark said: EDM 900 What is the little blue thing sticking out of the panel at the left edge of the EDM-900? Quote
carusoam Posted June 11, 2022 Report Posted June 11, 2022 That color looks familiar… the LVL button..? https://www.garmin.com/en-US/blog/aviation/blue-button-helping-keep-blue-side/ -a- Quote
bmcconnaha Posted June 11, 2022 Report Posted June 11, 2022 lots of time behind both. I like the ability to add alerts and such to the EIS. The JPI is a fine product also. if i wasnt cutting a panel, id stick with a round instrument. Quote
PJClark Posted June 11, 2022 Report Posted June 11, 2022 12 hours ago, Ragsf15e said: Curious, do you have 2 x OAT probes to get temp for the jpi and the g3x? I wish they could share but I don’t think they do? There are two. They always disagree. I am not OCD so I don't fret about it. Quote
PJClark Posted June 11, 2022 Report Posted June 11, 2022 10 hours ago, Fly Boomer said: What is the little blue thing sticking out of the panel at the left edge of the EDM-900? Piece of tape or some other packaging artifact left over from install. See previous post for OCD status. 2 Quote
Fly Boomer Posted June 11, 2022 Report Posted June 11, 2022 1 minute ago, PJClark said: See previous post for OCD status. Some of us prefer CDO (alphabetical order). 1 3 Quote
rbp Posted June 12, 2022 Report Posted June 12, 2022 On 6/10/2022 at 6:47 PM, PJClark said: EDM 900 I like this set up. Quote
Greg Ellis Posted June 16, 2022 Report Posted June 16, 2022 On 6/10/2022 at 9:42 PM, carusoam said: That color looks familiar… the LVL button..? https://www.garmin.com/en-US/blog/aviation/blue-button-helping-keep-blue-side/ -a- The level button is down below. He is asking about the little blue thing sticking out on the left side of the EDM. As someone previously stated it looks like a piece of packaging from the install or some such. Quote
ArtVandelay Posted June 16, 2022 Report Posted June 16, 2022 It’s a piece of painters tape that held the protective clear plastic it’s ship with. Quote
Andy95W Posted June 16, 2022 Report Posted June 16, 2022 On 6/11/2022 at 8:54 AM, PJClark said: There are two. They always disagree. I am not OCD so I don't fret about it. Set one to °C, the other to °F. Quote
FlyingDude Posted June 17, 2022 Report Posted June 17, 2022 OCD is 3 letters, so I have the jpi700, g5 AND windshield OAT probes. All in C (well, the windshield probe has both)... And they all disagree... Windshield and G5 probes are pretty close to one another (in readout, not locationwise). Jpi probe is on the lateral air scoop and I'm starting to think that it's not adding any value... Quote
kortopates Posted June 17, 2022 Report Posted June 17, 2022 7 hours ago, FlyingDude said: OCD is 3 letters, so I have the jpi700, g5 AND windshield OAT probes. All in C (well, the windshield probe has both)... And they all disagree... Windshield and G5 probes are pretty close to one another (in readout, not locationwise). Jpi probe is on the lateral air scoop and I'm starting to think that it's not adding any value... the naca scoop on the side reads higher than actual, too close to exhaust and engine. Really needs to be in undisturbed air. But installers love using the naca scoop because it’s couldn’t be easier to install there. Quote
LANCECASPER Posted June 17, 2022 Report Posted June 17, 2022 Knowing that Garmin is selling a lot of their EIS, it wouldn't surprise me to see JPI certify their experimental EDM-350. https://www.jpinstruments.com/shop/edm-350/ 1 Quote
ArtVandelay Posted June 17, 2022 Report Posted June 17, 2022 7 minutes ago, kortopates said: the naca scoop on the side reads higher than actual, too close to exhaust and engine. Really needs to be in undisturbed air. But installers love using the naca scoop because it’s couldn’t be easier to install there. True, for those of us with 1 exhaust, you’ll want to install it on the opposite side. Mine runs ~3° hot. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.