Eddy Current Inspection near Kansas City, MO?

[Vitus]

Hey fellow Mooniacs!

I am looking for a shop that can do a 100 hour eddy current inspection on the prop of a M20F I just bought. The plane is currently in Lee's Summit, MO (KLXT) just south of Kansas City. I can't fly the plane somewhere so the testing would need to be done onsite at KLXT. Any help is appreciated!

Cheers,
Vitus

[carusoam]

Welcome aboard Vitus!

There might be a way to ferry the plane...(?) 

The AD for the prop hasn’t found many Mooneys needing this work done... as in one crack was found? Out of the thousands of Mooneys here...

Best regards,

-a-

[nebhuskr123]

I'm in the Kansas City area with a C and had an AD prop until recently. As far as I know there isn't a shop in Kansas City that does the ECI, I used to take mine to Aircraft Accessories in Tulsa and their pricing wasn't too bad from what I remember.

 

Mike

[markgrue]

Removing and reinstalling the prop is some work but not much in cost.  Just an o ring if I remember correctly.  Perhaps a weekend road trip to a shop that can do it?

 

Mark

[RobertGary1]

Just get the ferry permit

[Matt Hupp]

Hello,

My company, Quality and NDT Solutions, LLC does eddy current and other NDT inspections.  We are based in Tulsa and able to travel if necessary.

Thanks.

Matt Hupp, Owner

918-895-1050

[carusoam]

Welcome aboard Matt!

Do you have a website to go with that?

Best regards,

-a-

[MooneyMitch]

On 12/21/2020 at 11:23 PM, carusoam said:

The AD for the prop hasn’t found many Mooneys needing this work done... as in one crack was found? Out of the thousands of Mooneys here..

Wish we could make that AD go away ( and I don’t mean by spending thousands on a new unit) !

[Matt Hupp]

Thanks!  Our website is qualityandndtsolutions.com.

 

[carusoam]

Livened Matt’s link...

When in the Tulsa area...   https://www.qualityandndtsolutions.com

Best regards,

-a-

[danad]

Aviation Plus in Kenosha, WI (KENW) will do it for $200 on wing.

http://aviationplusllc.com/19801.html