JPI Data Port Part Number

[Matt Ward]

Does anyone know a part number or how to get a replacement for the data port that goes with the EDM 700, shown here? I can’t find it in any JPI documentation I have. Thanks!

 

 

[larryb]

Well if you are not in a big hurry I have one. I would have to spend a little time looking. But I’m away from home at the moment and won’t be back for a week or two.

[LANCECASPER]

15 hours ago, Matt Ward said:

Does anyone know a part number or how to get a replacement for the data port that goes with the EDM 700, shown here? I can’t find it in any JPI documentation I have. Thanks!

 

 

What makes you think it's the data port (It and the connections look fine) and not the connection at the JPI?

[Matt Ward]

@LANCECASPER I guess I don't really know - I'm just trying to troubleshoot it.  I've tried a mix of connections (USB to Serial adapter, USB magic box from JPI, two laptops) and no luck.  I put a multimeter on the plug and while I got +-7V, it was finicky.  I had to put the probe in just the right spot.  I am going to try some contact cleaner but the data port was just the next item on my list.  

[LANCECASPER]

You probably already have the instructions, but I'll say this unless you follow the instructions exactly it doesn't work. I thought mine wasn't working properly but it was me.

 

Here's a couple links just in case:

https://www.jpinstruments.com/wp-content/uploads/2012/10/ReadMeBeforeDownload3.pdf

https://www.jpinstruments.com/wp-content/uploads/2012/10/PG-EDM-800-Rev-X-pls-110817.pdf

If all that doesn't work I would call JPI Tech Support on your cell sitting in the airplane.

[Matt Ward]

Thanks for that.  There is another thread I started where I did think it was me, 

It still may be, but I can't figure it out!

And unfortunately JPI tech support is closed still for COVID.

 

[tmo]

I get that "COVID" but come on, tech support is definitely something that can be done remotely and online; even shipping parts can be done safely...

To answer the question, it looks very much like a power receptacle - perhaps measure precisely and try to narrow it down in the Mouser catalog.

[Matt Ward]

I actually ended up getting it to work.  I ended up putting some contact cleaner on it but I'm not sure that matter. Deep in the settings there is a page called RCRD. Mine was set to N.  When I set it to Y, the DUMP menu appeared.