Ron McBride Posted June 19, 2016 Report Share Posted June 19, 2016 5 hours ago, Hank said: Fixed that for you, Bob! (Sorry we don't have a line-through font available.) Some of us actually prefer the quadrant control to having an assortment of knobs sticking out of the panel to try to crawl past getting in and out. It wasn't bad on the Cessna as a student because I had a door on the left, but I really don't want to work my way to the right with the throttle and mixture knobs sticking way out of the panel. Like everything else it's a mix of personal preference and what you're used to. I prefer the quadrant my self. I can grab the throttle, prop and mixture all at once as needed, and operate the flaps with out taking my hand off at all. Retract the flaps on the runway and my hand never leaves the engine controls. I fly a Comanche several months ago, and the throttle with the center push button friction lock was very inconvenient for me. Ron 1 Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 9 hours ago, Hank said: Push/pull is generally used for single engine Fixed that for you, Bob! (Sorry we don't have a line-through font available.) Push/pull is generally favored for single engine. "What I have written I have written." (John 19:22) Quote Link to comment Share on other sites More sharing options...
carusoam Posted June 20, 2016 Report Share Posted June 20, 2016 push/pull w/precision twist is good for controlling MP. not going with Sam Husk's %hp on whatever device he is using... Hank, they hid the strike-out at the top of the editing field. iPad and explorer... Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Marauder Posted June 20, 2016 Report Share Posted June 20, 2016 Like Ron I like my quadrant. Especially when taking off or doing a go around. The only downside is lack of resolution you can get with a vernier control. Sent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 Most folks like what they're stuck with! 1 Quote Link to comment Share on other sites More sharing options...
Ron McBride Posted June 20, 2016 Report Share Posted June 20, 2016 1 hour ago, Bob_Belville said: Most folks like what they're stuck with! It only takes money to fix what your are stuck with. amu's Ron Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted June 20, 2016 Report Share Posted June 20, 2016 Most folks like what they're stuck with! Life is too short to be stuck with something you don't want, in the end the money you spent on hangar, avgas, maintenance....will be much more than you spend on the plane itself especially when you consider you'll get most of it back when you sell. So I say buy what you want, you'll be happier in the long run then if you just settle for something less. Quote Link to comment Share on other sites More sharing options...
Andy95W Posted June 20, 2016 Report Share Posted June 20, 2016 4 hours ago, Bob_Belville said: Most folks like what they're stuck with! Completely agree! Just like Crosby, Stills, and Nash said: "If you can't be with the one you love, honey Love the one you're with"! 2 Quote Link to comment Share on other sites More sharing options...
Marauder Posted June 20, 2016 Report Share Posted June 20, 2016 Most folks like what they're stuck with! Well, I see this topic is headed towards one of those wonderful sidebars topics; use CamGuard, don't use CamGuard, run LOP, run ROP, flaps on/flaps off. What shall we label this one? The infamous "rod versus lever" debate? Or perhaps, some like them vertical While others like them horizontal Sent from my iPad using Tapatalk 3 Quote Link to comment Share on other sites More sharing options...
Andy95W Posted June 20, 2016 Report Share Posted June 20, 2016 1 hour ago, Marauder said: Well, I see this topic is headed towards one of those wonderful sidebars topics; use CamGuard, don't use CamGuard, run LOP, run ROP, flaps on/flaps off. What shall we label this one? The infamous "rod versus lever" debate? Or perhaps, some like them vertical While others like them horizontal Some like unicorns 2 Quote Link to comment Share on other sites More sharing options...
smccray Posted June 20, 2016 Report Share Posted June 20, 2016 On 6/19/2016 at 9:39 AM, Hank said: If you ask a bunch of J owners, each will say the most preferable year is the one each owns. With that caveat... I bought a 205 primarily for 2 reasons- it had all the upgrades from the early J models, and as one of the first airplanes that qualified for the gross weight increase it gives me a useful load over 1000 lbs. '84-'86 you get the upgrades without the useful load. If you get into the 90's J models they generally come with a higher price. The late 80s is a real sweet spot. Quote Link to comment Share on other sites More sharing options...
Marauder Posted June 20, 2016 Report Share Posted June 20, 2016 Now we're talking. Fat unicorns! Sent from my SM-G900V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 2 hours ago, Marauder said: Well, I see this topic is headed towards one of those wonderful sidebars topics; use CamGuard, don't use CamGuard, run LOP, run ROP, flaps on/flaps off. What shall we label this one? The infamous "rod versus lever" debate? Or perhaps, some like them vertical While others like them horizontal Sent from my iPad using Tapatalk I've just spent half an hour browsing pics of older Mooneys wondering when the layout changed from throttle/mixture/prop to throttle/prop/mixture. Quote Link to comment Share on other sites More sharing options...
Marauder Posted June 20, 2016 Report Share Posted June 20, 2016 6 minutes ago, Bob_Belville said: I've just spent half an hour browsing pics of older Mooneys wondering when the layout changed from throttle/mixture/prop to throttle/prop/mixture. Same reason rubbing sticks together was replaced by a lighter. 1 Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 Just now, Marauder said: Same reason rubbing sticks together was replaced by a lighter. Read my lips. When... not why! 2 Quote Link to comment Share on other sites More sharing options...
Andy95W Posted June 20, 2016 Report Share Posted June 20, 2016 Bob- they didn't change for 1966, at least. When your airplane got modified with your new panel, the installer did the right thing and made them "right". Big pain in the butt, otherwise. So much so, that I have my panel apart right now and am installing a new prop cable and I still aren't going to sway the mixture and prop controls. My argument is that I'm used to it now! My gut tells me that when they went to the quadrant (1970 or 71?) they changed the order to standard. Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 Just now, N1395W said: Bob- they didn't change for 1966, at least. When your airplane got modified with your new panel, the installer did the right thing and made them "right". Big pain in the butt, otherwise. So much so, that I have my panel apart right now and am installing a new prop cable and I still aren't going to sway the mixture and prop controls. My argument is that I'm used to it now! My gut tells me that when they went to the quadrant (1970 or 71?) they changed the order to standard. Yeah I found pics of original set ups from the time of my plane and they are set up as mine is now. (We kept the arrangement when we built the new panel.) So, the "standard" layout, as defined by Piper, Cessna, etc, from the early '60s was throttle/prop/mixture? Maybe Al Mooney thought those guys were wrong. I recently replaced all 3 cables, personally, but I can't say whether it would have been a problem to flip the Mixture and Prop. It's possible the holes are different - I know I had to ream out the throttle hole for the new McFarlane. Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted June 20, 2016 Report Share Posted June 20, 2016 19 hours ago, Marauder said: The only downside is lack of resolution you can get with a vernier control. Sent from my iPad using Tapatalk ISTM that's a pretty big downside for both the prop and mixture. Quote Link to comment Share on other sites More sharing options...
Marauder Posted June 21, 2016 Report Share Posted June 21, 2016 Just now, Marauder said: Same reason rubbing sticks together was replaced by a lighter. Read my lips. When... not why! I love it when I can pull Bob's grammar book out with a single word! Ain't that the truth Bob? Sent from my SM-G900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
CaptainAB Posted June 21, 2016 Report Share Posted June 21, 2016 Your mooney is never too young and never too thin..... Quote Link to comment Share on other sites More sharing options...
Ron McBride Posted June 21, 2016 Report Share Posted June 21, 2016 My 69F is the quadrant an the standard layout. Most of my experience is multi engine, so this works great for me. Ron Quote Link to comment Share on other sites More sharing options...
kris_adams Posted June 21, 2016 Report Share Posted June 21, 2016 On June 19, 2016 at 10:39 AM, Hank said: If you ask a bunch of J owners, each will say the most preferable year is the one each owns. Exactly...whichever plane you already own! 1 Quote Link to comment Share on other sites More sharing options...
amillet Posted June 21, 2016 Report Share Posted June 21, 2016 '96-98 J's have new Ovation style interior, with overhead light switches. Only 19-20 made each year. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.