Jump to content

Recommended Posts

Posted

Good condition cable for the "Power Boost" (from the power boost nose door to sliding lever on console) for my 73E. My cable is fraying and needs replaced.

Posted

I have a 1963 M20C and i am looking for the engine baffles, a good carburetor air intake duct, a nose gear truss, a nose gear tire (500x5 6 Ply). I hope you can help. Thanks

FrancisG

Posted

Francis. 

I have the intake boot in excellent condition, the truss, and a set of baffling. Does your oils cooler lines route up over the engine and down to the oil cooler or behind the engine and down? Brent

Posted

Brent

I will have to check on the oil cooler routing, but i would like to take what you have, do you have fresh nose gear rubber pucks, i am also looking for front tire. Please PM or call / text at 415-279-0609 Thanks

Francis

Posted

I'm looking for an exhaust pipe that's in primo condition.  I have a 1967 F.

IMG_2280.jpg

I have an extra exhaust pipe from my 67 F.  I will get it out and post a picture next time I'm at the hanger.

  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
Posted

I need a steel prop oil line for Lycoming A1A Mooney M20A.  I have a friend with a M20B and it uses the same line.  Straight fitting out of governor than 90 deg forward to run along top edge of right side oil sump.

JR 

jrflyboyVP2@yahoo.com

512-940-8038

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.