Wanted: Oxygen Outlet Cover

[jpjp]

I am needing to replace a missing O2 Nut and flip style cover on a K Model.  Has anyone had any luck locating replacements or any idea where I can find a replacement?  Thanks

[Houman]

Is this installed in the plane or portable ?

[jpjp]

Installed in the plane on the L/H rear sidewall.  There are three outlets on the panel.  One of the flip covers is gone.

[N201MKTurbo]

It is part of an AVOX (Scott) Zodiac 23599-22 outlet assembly.

 

I cannot find the cover listed separately anywhere.

 

You might try a junk yard. That part is specified for both Mooney and AeroCommander 112 and 114

 

It looks like you could just unscrew the cover.

[DonMuncy]

Taking the cover off is easy. The "nut" is built to take a special two prong tool to install and remove, but an awl or other such tool will work. Or if you have a snap ring tool.

[N201MKTurbo]

Try these guys:

 

http://www.o2corporation.com/products_OxygenOutlet.html

[Aerodon]

I have some spare new ones:  supercub180@gmail.com.