Jump to content

looking for a legible copy of ovation electrical schematic, cabin lights not working


Recommended Posts

Posted

my cabin lights are not working.  There is no power at the pilots armrest master switch.  non of the circuit breakers are labeled for lights etc.  the schematic in my service manual pdf is illegible (pdf).  the serial number is 29-0037 which the service manual references to an electrical drawing 800304 R2 W.  alternatively does anybody know which breaker the cabin lights come off of?

Posted

Thank You!  It would seem it was one of the three in line fuses in the battery area in the avionics bay in the tail.  I found two blown fuses, both now repaired.  As soon as I put the front panel and side panels back together, reinstall the seats, then I can fly it and confirm all works.  quite a goose chase.  

  • Sad 1
Posted

The fuses are not in series and not labeled so I don’t yet know which one is which. But I will know as I flew the plane yesterday and the fuse for the cabin light blew again so there must be a short. Darn front jack bolt broke so now I’ve got to have the engine mount repairsed so cabin lights are a low priority. 

  • Sad 1
Posted
  On 10/15/2022 at 3:29 PM, glenn reynolds said:

The fuses are not in series and not labeled so I don’t yet know which one is which. But I will know as I flew the plane yesterday and the fuse for the cabin light blew again so there must be a short. Darn front jack bolt broke so now I’ve got to have the engine mount repairsed so cabin lights are a low priority. 

Expand  

Oh no. Mechanical issue aside, searching for a shorted wire is so damned hit and miss. Good luck. 

Posted
  On 10/15/2022 at 3:29 PM, glenn reynolds said:

The fuses are not in series and not labeled so I don’t yet know which one is which. But I will know as I flew the plane yesterday and the fuse for the cabin light blew again so there must be a short. Darn front jack bolt broke so now I’ve got to have the engine mount repairsed so cabin lights are a low priority. 

Expand  


what happened to the mount?

Yikes!

-a-

Posted

I threaded a bolt into the front engine mount and jacked up the front tire. The bolt broke so the jack slide forward and dented the tubing of the engine mount. 

  • Thanks 1
Posted
  On 10/18/2022 at 12:35 PM, glenn reynolds said:

I threaded a bolt into the front engine mount and jacked up the front tire. The bolt broke so the jack slide forward and dented the tubing of the engine mount. 

Expand  


Bummer…

Jack points were rumored to come with the Ovations…

When ownership was transferred… I got everything but the Jack points…. :)
 

I can only imagine what correcting a dent in an engine mount requires…
 

Best regards,

-a-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.