Newowner Posted May 16, 2021 Report Posted May 16, 2021 Where do I buy all 4 control cables (mixture, prop, ram air, throttle)? Sent from my iPhone using Tapatalk Quote
Prior owner Posted May 16, 2021 Report Posted May 16, 2021 What year and model aircraft do you have? Quote
Newowner Posted May 16, 2021 Author Report Posted May 16, 2021 1966 M20F. Doing engine overhaul.... and need to replace all cables. Sent from my iPhone using Tapatalk Quote
Rick Junkin Posted May 16, 2021 Report Posted May 16, 2021 You can try McFarlaneaviation.com, they can custom build anything they don't normally stock. McFarlane is also a new Mooney Summit sponsor this year! Cheers, Rick 2 Quote
Newowner Posted May 16, 2021 Author Report Posted May 16, 2021 I found new mixture cable part 660154-003. Can anyone tell me if it’ll replace my cable?Sent from my iPhone using Tapatalk Quote
Jim Peace Posted May 16, 2021 Report Posted May 16, 2021 I would send them your old cables....tell them you want the exact length etc..then make sure you get your old cables back incase there is a FCUK up.... not that I have been through this before...LOL 2 Quote
EricJ Posted May 16, 2021 Report Posted May 16, 2021 1 hour ago, Newowner said: I found new mixture cable part 660154-003. Can anyone tell me if it’ll replace my cable? Sent from my iPhone using Tapatalk Find the Illustrated Parts Catalog (IPC) for your airplane. They are usually available for download for free if you search around. It has drawings showing the locations and part numbers for all parts, including the control cables. The correct part number may depend on the specific model and serial number of your airplane, so it's hard to say whether it is correct without that. 2 Quote
Ragsf15e Posted May 16, 2021 Report Posted May 16, 2021 Mcfarlane can build them as described above. Or, buy them by part number through an MSC (like Lasar). Either way, mcfarlane will be the manufacturer. Quote
Tcraft938 Posted May 16, 2021 Report Posted May 16, 2021 8 hours ago, Junkman said: You can try McFarlaneaviation.com, they can custom build anything they don't normally stock. McFarlane is also a new Mooney Summit sponsor this year! Cheers, Rick Definitely contact them. They are awesome and served me well for the old Mooney. 1 Quote
Prior owner Posted May 17, 2021 Report Posted May 17, 2021 Their mixture cable is a generic cable that can be fitted to many aircraft- you trim it to length. The original mixture Mooney cable had the firewall fitting swaged to it. The MacFarland cable had no fitting included, FYI.... so you need to source a firewall fitting for the mixture cable. Or did they forget to include one with mine? Quote
carusoam Posted May 17, 2021 Report Posted May 17, 2021 Great thread... We discussed The Who and the how.... and the why was already covered.... Now about that ram air... Many get changed for updated intake plumbing.... which is a fancy way to eliminate the control... seal problems and other intake challenges... Something to consider before getting a new cable... MS spending OPM! Best regards, -a- Quote
Bartman Posted May 17, 2021 Report Posted May 17, 2021 I removed the ram air last year and many other J owners have done the same. The F reportedly benefits more from the Ram Air than the J and many swear by it. However, that is just another system to maintain and honestly the cost of the seal is more than enough to either discourage me from using it, or more likely to eliminate it altogether. Quote
Ragsf15e Posted May 17, 2021 Report Posted May 17, 2021 I have an F and I’d keep the Ram air. 6 years with no expense yet which means next month I’m probably SOL. Quote
KSMooniac Posted May 17, 2021 Report Posted May 17, 2021 Keep ram air on pre-J models, the and buy control cables from McFarlane! Great folks, OEM manufacturer. Sent from my LM-V405 using Tapatalk 1 Quote
1964-M20E Posted May 17, 2021 Report Posted May 17, 2021 McFarlane is making new ones for my 67F. I sent the throttle and mixture cable to them and they completed the form. 48166 Custom Form with dims for ref..pdf Quote
Newowner Posted May 17, 2021 Author Report Posted May 17, 2021 Thank you for all your replies. I talked to my A/P and he’s kinda uneasy to install those cables coz of legality. When you order them do they provide any papers making them legal to use? I know that they make them for Mooney but Mooney certifies them and charges double. Sent from my iPhone using Tapatalk Quote
Raptor05121 Posted May 17, 2021 Report Posted May 17, 2021 IIRC when you specify length or have McFarland make them to length, it falls under "owner produced" 1 Quote
RobertGary1 Posted May 17, 2021 Report Posted May 17, 2021 3 hours ago, Raptor05121 said: IIRC when you specify length or have McFarland make them to length, it falls under "owner produced" I assume they also have a PMA stamp on them. Quote
EricJ Posted May 17, 2021 Report Posted May 17, 2021 7 hours ago, Newowner said: Thank you for all your replies. I talked to my A/P and he’s kinda uneasy to install those cables coz of legality. When you order them do they provide any papers making them legal to use? I know that they make them for Mooney but Mooney certifies them and charges double. Sent from my iPhone using Tapatalk When you send yours to McFarlane and ask them to duplicate it, it can fall under one of the processes that are accepted for Owner Produced Parts. You can make a log entry yourself regarding the OPP process (be sure to read, understand, and follow the regs/ACs on OPP), and then your A&P/IA can install it under a separate log entry. 4 hours ago, RobertGary1 said: I assume they also have a PMA stamp on them. Nope, not FAA approved. See the disclaimer in the signature block of the drawing that 1964-M20E posted above. It gets installed as an Owner Produced Part, so the OPP process requirements should be followed. I've done two like this. Even as an A&P I can't produce the part, so I make a logbook entry for the OPP as owner/operator, and then a separate entry to install it as an A&P. 2 Quote
Prior owner Posted May 18, 2021 Report Posted May 18, 2021 Macfarland told me that they are still seeking certification of their throttle and prop cables for the Mooney.... the generic mixture cable is already certified for use in our planes...at least that is my understanding, per their website. The new design vernier throttle & prop cables without a push button are pretty slick- turn for vernier or just grab the knob and move in and out without having to unlock it. Quote
carusoam Posted May 18, 2021 Report Posted May 18, 2021 15 hours ago, Newowner said: Thank you for all your replies. I talked to my A/P and he’s kinda uneasy to install those cables coz of legality. When you order them do they provide any papers making them legal to use? I know that they make them for Mooney but Mooney certifies them and charges double. Sent from my iPhone using Tapatalk What you are seeing here is the process for an owner to get parts for his plane when the parts are no longer available... There are a few twists and turns to each situation... Fortunately Macfarlane is very familiar and supportive to the Mooney community... The process includes sending in the only ones you have... they copy them... because they make engine controls for a living... Fully documented, and very legal... You can have your mechanic brush up on the owner supplied parts by talking to Macfarlane... Of course... If Mooney makes the part... and can supply it.... call you local MSC and see if it is available... depending on the day and year... Mooney hasn’t always been able to supply some important parts... unfortunately... How many times are you going to answer the same question? Year and model of your plane is pretty important for many conversations... Everybody else is doing it.... or endlessly writing I have a xx yy... Best regards, -a- Quote
mike20papa Posted May 18, 2021 Report Posted May 18, 2021 (edited) I used a 337 to install all MacFarlane replacement cables in my A Model. I'm looking for the .pdf in my files, but cannot locate it .. right now. Technical writing, as well as turning wrenches, can be a real asset in the aviation world. I do remember citing MacFarlane producing similar cables for other certificated AC under PMA. I think here you reference the FAA standard regarding owner produced parts. I think I even included a letter from MacFarlane saying that all of their cables are manufactured under identical technical standards. Their is also a FAA technical bulletin titled something like "engine controls for reciprocating engines" I referenced that and the golden rule for any 337 is to finish it with "instructions for continued airworthiness" (even if you say there are none required) but I quoted some lines out of this tech bulletin. I also attached the drawings for the replacement cables on MacFarlane's standard form. Hope this helps. My AI at the time required this and a 337 on file is always a plus for any "even minor" work. Joe Edited May 18, 2021 by mike20papa Quote
Tom 4536 Posted May 18, 2021 Report Posted May 18, 2021 17 hours ago, PilotCoyote said: Macfarland told me that they are still seeking certification of their throttle and prop cables for the Mooney.... the generic mixture cable is already certified for use in our planes...at least that is my understanding, per their website. The new design vernier throttle & prop cables without a push button are pretty slick- turn for vernier or just grab the knob and move in and out without having to unlock it. My new Macfarland vernier throttle cable would be "slick" if the vernier actually worked. I can rotate mine 10 turns without any change. To get the vernier to work I have to push in while turning clockwise and pull slightly when turning counterclockwise. I've ended up using it as a non-vernier cable. Also, according to my MSC, the notch on the cable makes it almost impossible to set the landing gear low MP warning. I have had 2 separate service facilities try to adjust the alarm and they both gave up. It seems the cable needs some more design time. Quote
ArtVandelay Posted May 18, 2021 Report Posted May 18, 2021 My new Macfarland vernier throttle cable would be "slick" if the vernier actually worked. I can rotate mine 10 turns without any change. To get the vernier to work I have to push in while turning clockwise and pull slightly when turning counterclockwise. I've ended up using it as a non-vernier cable. Also, according to my MSC, the notch on the cable makes it almost impossible to set the landing gear low MP warning. I have had 2 separate service facilities try to adjust the alarm and they both gave up. It seems the cable needs some more design time.FWIW, mine works fine. How much resistance is there?I had to have my shop do it twice. I ended up shutting down engine with throttle in the proper position. Then I had them disconnect throttle cable at the engine, adjust the throttle cable to turn on the warning and reconnect it. Quote
Tom 4536 Posted May 18, 2021 Report Posted May 18, 2021 2 minutes ago, ArtVandelay said: FWIW, mine works fine. How much resistance is there? I had to have my shop do it twice. I ended up shutting down engine with throttle in the proper position. Then I had them disconnect throttle cable at the engine, adjust the throttle cable to turn on the warning and reconnect it. I measured the distance the throttle knob had to be out for 16''MP. The shops used that to set the alarm switch. But sometimes the warning comes on at 23MP and sometimes 19. Never been able to get any consistency or even close to the warning coming on at 16MP. I don't have much resistance in the cable. I tried increasing/decreasing the friction but that doesn't make the vernier work. I am open to any ideas because Macfarlane said to work with the installer and the installer has given up on the cable working correctly. Same with the second MSC. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.