Jump to content

Recommended Posts

Posted

Anyone know the size of the small set screw for the overhead vent knob on a 1980 231?  Last shop that removed the overhead panel lost it. Luckily it was set in the “on” position. 

 

Thanks

Posted

If you actually have the knob itself, just visit a haedware store and test different machine screws to find one that fits. Then look fir a set screw the same size. I'd guess #4-40 or #6-32, but it's only a guess. You'll also want a little teeny Allen wrench to fit jt.

Posted

Since the knob is off It may not be a bad idea to take apart the rest of ths mechanism a little and spray some triflow in it. That mechanism probably never gets any lubrication and it’s not easy to find parts. I did that when I took the interior out and very happy I did.

  • Like 2
Posted
On 4/20/2019 at 6:20 AM, N201MKTurbo said:

That would be an 8-32 dog nose set screw with hex drive 5/16 long

 

 

Set Screw.PNG

Mooneyspace community for the win!! 

It's driven by a 5/64 hex wrench if I recall.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.