Avionics for Sale!! Looking for reasonable offers!!*REVISION 7 !!!!!

[Speed Merchant]

I just finished updating my 1984 Mooney 201 panel.  My plane spent the majority of it's life in northern Minnesota and has 2300 hours total time.  Everything I am selling worked very well when removed.   Reasonable offers will be considered.

Here is a list of equipment being offered for sale (Images Below):

1. King KG258 Horizon Gyro (Image 1a and Image 1B): $300
2.  
3. Two Auto Pilot Servos: $300 each (or $500 for the pair)
4. Trim Servo: $500
5.  
6.  
7.  
8.  
9.  
10. Oil Pressure Amp Part No. 950D0311-002: $50
11.  
12.  
13.  
14. Antenna: $50
15. Avionics Cooling Fan: $50
16. 3 Switches: $125 each 
17. Intercom: $50
18.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[RLCarter]

WOW…… pictures of the new panel?

[Speed Merchant]

RL

 

Here is a before and after shot. I had to put my Dar's signature on it. It was just the right thing to do. Thanks for your interest!

 

Refaeds

 

Curt

 

[Marauder]

Can you post a closer picture of your switches (and what you used)? Looks like you have some sort of guard on them.

[Speed Merchant]

yep I am going to the airport today-I will take a few shots and send them.

[J0nathan225]

interested in Altimeter.  When was the last check on it?   ALSO AMAZING PANEL!!!

[Speed Merchant]

3 hours ago, J0nathan225 said:

interested in Altimeter.  When was the last check on it?   ALSO AMAZING PANEL!!!

sold it last night sorry. Thanks for the complement!

[cctsurf]

Is that the tach sender (that attaches to the rpm cable mount on the back of the engine) on which the tach and manifold pressure gauges are propped up?  Is that what you are calling "Manifold Pressure and Tach components"?  I'd give you $225 for the tach, wire, and sender, if you have them.

And, it is a beautiful panel you have built!

[Speed Merchant]

On 6/19/2021 at 8:44 PM, MIm20c said:

This was a nicely executed upgrade. I really like the 750/355 combo. Everything you need with the proper backups. Agree with the above, one of the nicest J panels I’ve seen so far. 

 

12 minutes ago, cctsurf said:

Is that the tach sender (that attaches to the rpm cable mount on the back of the engine) on which the tach and manifold pressure gauges are propped up?  Is that what you are calling "Manifold Pressure and Tach components"?  I'd give you $225 for the tach, wire, and sender, if you have them.

And, it is a beautiful panel you have built!

I have the tach. There are two stainless steel assemblies that were mounted to the engine mount that are part of the tach installation and manifold pressure installation. .  I do not think I got a sender from the avionics shop or the wires. Do you have a picture of what you are looking for?

Curt

[Speed Merchant]

On 7/1/2021 at 10:55 AM, Marauder said:

Can you post a closer picture of your switches (and what you used)? Looks like you have some sort of guard on them.

Here are the pictures I promised-I used mil spec circuit breaker switches with switch guards. They are good for a 1000000 cycles. and sort of remind me of the switches in an old Alfa or Jag-sort of a generational thing. I was worried about a switch breaking a switch in the middle of no where and not being able to get a replacement quickly. 

[cctsurf]

21 minutes ago, Speed Merchant said:

I have the tach. There are two stainless steel assemblies that were mounted to the engine mount that are part of the tach installation and manifold pressure installation. .  I do not think I got a sender from the avionics shop or the wires. Do you have a picture of what you are looking for?

I'll PM you.

[carusoam]

Nice switch guards C!

The CB switches have a great reputation for lasting decades… even half a century for some…

Commonly used ones that carry high current like the old landing lights… have a tendency to wear out slowly…

The hint of a wearing CB switch… is the missing click that you used to get when they were new…

Kind of like the detents on the fuel selector…

Hard to know what it is supposed to be like if you haven’t experienced a new one yet…

PP thoughts only, not a mechanic …

Best regards,

-a-

[moosebreath]

Trim servos are hard to find but surely you mean $900 not $9000!  What model is it?

[carusoam]

@Speed Merchant Price check, on trim servo…?  (Moose’s request above)

-a-

[Speed Merchant]

Yep the servo is 900 not 9000! Sorry about that chief!! The trim servo came out of a 84 201 with a KAP 150. I attached two pictures of the servo.

thanks!

[Speed Merchant]

On 7/12/2021 at 11:05 PM, moosebreath said:

Trim servos are hard to find but surely you mean $900 not $9000!  What model is it?

Sorry for the confusion the price is 900. 

[Skywalker]

I'm looking for the strip of lights above the panel underneath the glare shield. Did you replace them? I have a 1977 J model.

 

thanks!

[Speed Merchant]

I did not change the glareshield at all. I am still using the stock lights.

[Speed Merchant]

On 7/12/2021 at 11:12 PM, carusoam said:

@Speed Merchant Price check, on trim servo…?  (Moose’s request above)

-a-

trim servo is now 700

[M20Kid]

I'm not sure if I need the Hoskins 101 or not, mine has been intermittent for a while but I'm unsure of the reason.  Your price includes the transducers?  How do I contact you to work out the details?

[Skywalker]

14 hours ago, Speed Merchant said:

I did not change the glareshield at all. I am still using the stock lights.

OK thanks much

[Jerry Pressley]

Received the gear doors.  They look brand new and great packaging job. Thanks much Curt    jerryP

[Speed Merchant]

4 minutes ago, Jerry Pressley said:

Received the gear doors.  They look brand new and great packaging job. Thanks much Curt    jerryP

Thanks- great doing business with you.

16 hours ago, M20Kid said:

I'm not sure if I need the Hoskins 101 or not, mine has been intermittent for a while but I'm unsure of the reason.  Your price includes the transducers?  How do I contact you to work out the details?

Yes the price includes the transducer and switch.

[Speed Merchant]

On 7/16/2021 at 12:28 AM, M20Kid said:

I'm not sure if I need the Hoskins 101 or not, mine has been intermittent for a while but I'm unsure of the reason.  Your price includes the transducers?  How do I contact you to work out the details?

Yelp for 105 you gets the box , transducer abd switch. 

[apriav]

Where can I find the switch guards?

Looked Spruce and EDMO......