Jump to content

Recommended Posts

Posted

Is any amount of Aileron deflection on rudder application normal?

Noticed this happening in my run up checks. The yoke rotates maybe 10 degrees with full rudder deflection.

Never noticed it before (but maybe it was there). Now I'm really wondering if this isn't normal how the heck I never noticed it if it isn't a brand new issue.

I'm in a J 201 MSE.

 

Thanks!

Posted
52 minutes ago, EricJ said:

There are interconnect springs between the rudder and ailerons on J and other models.

It's my understanding that this is why the "J" is easily a feet on the floor during cruise and cruise turns.

 

Posted
1 hour ago, Derek said:

Is any amount of Aileron deflection on rudder application normal?

Noticed this happening in my run up checks. The yoke rotates maybe 10 degrees with full rudder deflection.

Never noticed it before (but maybe it was there). Now I'm really wondering if this isn't normal how the heck I never noticed it if it isn't a brand new issue.

I'm in a J 201 MSE.

 

Thanks!

Yeah, it took me a year to notice too.  Don’t feel bad.

Next time you’re moving it on the ground with your hand towbar, turn the nose wheel full deflection and look at all the control surfaces.

Posted
Just now, ArtVandelay said:

You do know the tail wheel guys will be rolling their eyes when they read that ?

Just as I was typing....but I agree it is the two sided rudder input I am keen on not a frozen right leg for an extra 3kts cruise :D

Posted
49 minutes ago, Ragsf15e said:

Yeah, it took me a year to notice too.  Don’t feel bad.

I found it in the PoH. I must have not absorbed that when reading about the systems.

7-3 "A spring-loaded interconnect device indirectly joins the aileron and rudder control systems to assist in lateral stability during flight maneuvers."

Embarrassing, but still glad I asked!

  • Like 1
Posted

After relocating, I've impressed two different CFIs with my smooth rudder skills! It makes Flight Reviews fun.

I think the interconnect goes all the way back to the original M20. It's certainly older than my 1970 C.

Posted

I do not think it is a Mooney exclusive or development.  I flew a Turbo 210 with an interconnect as well.  IIRC, I was told it was on the 210's without wing dihedral only.  Not sure which years that was.  

Posted

Don't feel bad - back when I was flying up north, a friend of mine who was flying for another charter service ended up at the same small remote airport as I was, holding for passengers. 

He was flying a Navajo, and had just done his PPC on it, which included a ground school. This was one of his first single pilot trips. 

He parks and tells me that he thinks something is wrong with the Navajo, because when he moves the rudders he notices the control column moves. I, never having flown a Navajo, said that sounded odd. I guess he called back to base and raised this with one of the mechanics, who wasn't familiar with Navajos, and dispatch decided to send a second plane out to inspect this one, and bring the passengers back. 

I am sure that he got his ass chewed out by the Chief Pilot for the extra costs, and not being familiar with the POH on the aircraft he was just type rated on...

  • Like 1
Posted

With the Mooney, it is hard to push the rudder pedals back and forth to see the bungees in motion...

The ground resistance is too high....

Might be able to see it better while up on jacks with the gear down...

PP thoughts only, not a mechanic....

Best regards,

-a-

  • Like 1
Posted
10 hours ago, ArtVandelay said:


You do know the tail wheel guys will be rolling their eyes when they read that ?

Got lots of time in tailwheels. Took my private checkride in a Cessna 140 tailwheel. 
 

-Robert 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.