DustinNwind Posted January 8, 2020 Report Posted January 8, 2020 Hi Folks! I looking for the just the flap for the heater box attached on the firewall for a 1965 M20E. Thanks! D Quote
Gary Bymers Posted January 8, 2020 Report Posted January 8, 2020 Quite sure I have one. Do you have a picture of yours (damaged or missing?) I have some heater boxes but not exactly sure what was on a 65? Thanks Gary 608 334 0051 Quote
carusoam Posted January 8, 2020 Report Posted January 8, 2020 The 65C has the box with two slide gates... one for hot air, the other for cold air... lots of rust collects on the sliding parts... If you go through enough effort... find a newer version with butterfly type valves and rubber seals... The 65 version works well after annual each year... somewhere before the next annual it would bind up again... Need a list of parts dealers? PP thoughts and old memories, not a mechanic... Best regards, -a- Quote
DustinNwind Posted January 8, 2020 Author Report Posted January 8, 2020 13 hours ago, Gary Bymers said: Quite sure I have one. Do you have a picture of yours (damaged or missing?) I have some heater boxes but not exactly sure what was on a 65? Thanks Gary 608 334 0051 Attached is the photo of what I need. Mainly the silver part as I manufactured my own piece. This was the first attempt then my second one was better and mounted the correct way (as this is not). There is a box on the outside that comes with it, but I don't need that. Thank you! D Quote
DustinNwind Posted January 8, 2020 Author Report Posted January 8, 2020 12 hours ago, carusoam said: The 65C has the box with two slide gates... one for hot air, the other for cold air... lots of rust collects on the sliding parts... If you go through enough effort... find a newer version with butterfly type valves and rubber seals... The 65 version works well after annual each year... somewhere before the next annual it would bind up again... Need a list of parts dealers? PP thoughts and old memories, not a mechanic... Best regards, -a- Mine just has one one one butterfly flap to the heater, then a separate control for outside air. 1 Quote
geoffb Posted January 10, 2020 Report Posted January 10, 2020 The factory part is no better than your owner manufactured part. Quote
DustinNwind Posted January 13, 2020 Author Report Posted January 13, 2020 Anyone have any luck on this? Thanks, D Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.