Ident button part number?

[amillet]

This is the remote Ident button on the yoke. The button broke off. Can you tell me what switch part number I need to order and where I can get it?  Thanks for your help.

[carusoam]

Alan,

which transponder do you have connected to it... it may be related...?

Best regards,

-a-

[OR75]

Go to chief aircraft website and search for switch 

Or sub mini momentary push button 

or alco 39-1 

all the switch does is sink a wire to the ground when you press it 

the sub mini switch is nice but a pain to solder 

the larger .... You may have to widen the hole ( the diameter is larger ) 

[amillet]

Originally connected to KT 76 C. Now connected to GTX 330 ES.

[amillet]

31 minutes ago, OR75 said:

Go to chief aircraft website and search for switch 

Or sub mini momentary push button 

or alco 39-1 

all the switch does is sink a wire to the ground when you press it 

the sub mini switch is nice but a pain to solder 

the larger .... You may have to widen the hole ( the diameter is larger ) 

Thank you!

[carusoam]

Hopefully, you find something that works from Chief...

The Yoke switches might be part of the integrated package supplied by BK.  (Like the AP group does?)

The PTT and XPDR button might be the same supplier...?

Hoping for the best.  

Best regards,

-a- 

[N201MKTurbo]

Looks more like a 39-12

http://www.grayhill.com/assets/1/7/Push_39_Panel_Mount.pdf

https://www.digikey.com/product-detail/en/grayhill-inc/39-12/GH7527-ND/353434

 

Edited May 7, 2018 by N201MKTurbo

[carusoam]

Interesting note near the bottom of Rich’s Grayhill link...

The button itself is held in place with super glue... and maybe available separately?

PP with fuzzy memory skills...

Best regards,

-a-

[Steve W]

4 minutes ago, carusoam said:

Interesting note near the bottom of Rich’s Grayhill link...

The button itself is held in place with super glue... and maybe available separately?

PP with fuzzy memory skills...

Best regards,

-a-

There's the plunger and the button(or cap). Most people just use the plunger as the button and omit the cap. In the photo the plunger is broken so it will require a whole new fancy $8 switch.

[amillet]

On 5/6/2018 at 7:19 PM, OR75 said:

Go to chief aircraft website and search for switch 

Or sub mini momentary push button 

or alco 39-1 

all the switch does is sink a wire to the ground when you press it 

the sub mini switch is nice but a pain to solder 

the larger .... You may have to widen the hole ( the diameter is larger ) 

I ordered the switch from Chief and installed it today with some help with soldering. Thanks again for your help @OR75