Need new spinner

[MooneyBob]

My shinny spinner has cracked. I tried to google the part number but it returns very little info.

It is McCauley D-6504 spinner. Where should I look to get new or overhauled one?

What is the fair price for the spinner like this?

Thanks

[pgrusenmeyer]

I'm going through the same process for my M20C. See post under vintage Mooneys. The spinner may be able to be welded. K & K Precision Welding in Wisconsin was recommended to me by Dan at LASAR. Comes back with a yellow tag. Also, Aircraft Spruce advertises spinner welding. Both places may be able to connect you with a new or used spinner.

Good luck,

Pat

http://www.precision-welding.com

http://www.aircraftspruce.com/catalog/appages/wspinnerrepair.php?clickkey=89605

[bonal]

I think K and K is where Dan sent mine they turned it round in just a few days and welds looked great till I got another crack in a new spot but their welds were still just fine it was a white spinner so touch up was easy. With a polished you will have to be careful not to upset the integrity of the weld when polishing it out.

[Awqward]

Just be thankful you have the MacCaulay spinner....I have the Hartzell Q-tip and not only was the dome cracked but also the aft and fwd bulkheads....I had the dome repaired at ASEI in Ga (the shop Aircraft Spruce re-sells) which was fine...good job and quick turnaround....they have an FAA approved repair process which also involves heat treating the weld....my problem is that I couldn't source an aft bulkhead from anywhere...new or used...anywhere on the planet....so Hartzell are pressing out a new one...when they can get it into their production schedule....will be 4+ months grounded by the time I get back in the air... :-(

The part number you are looking for is 680031-039 (polished) or 680031-019 (standard)....you will find it all in section 61-10-00 of your Illustrated Parts Catalog (IPC)...

[Mooneymite]

Prop spinners occassionally pop up on Barnstormers....too bad you need the McCauley:

 

USED HARTZELL 2 BLADE SPINNER • $650 • FOR SALE • Used Hartzell Chrome 2 Blade Spinner in new condition. p/n D-4797P s/n 900979 • ContactRay N. Franklin - AVIONICS SPECIALISTS LLC, Owner - located Loveland, CO USA • Telephone: 970.203.0505 . • Posted February 11, 2015 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad

[Cody Stallings]

Baileys Propeller Parts.

Ask for Mike, he will fix you up.

1-800-451-6777

[bumper]

I have an "as new" 3-blade spinner, polished aluminum (no backing plate) that I would part with on the cheap as I have no use for it. 

 

Best offer. 

[MooneyBob]

I have an "as new" 3-blade spinner, polished aluminum (no backing plate) that I would part with on the cheap as I have no use for it. 

 

Best offer.

Do you know what is the part number or what propeller it came from? I want to make sure it is the right one.

Thanks