Macauley Scimitar prop , 90 since new has a spinner and bulkhead , 10000

[Alan Fox]

[gevertex]

Looks beautiful! I have a few questions.

 

How much are you asking?
Does it fit 92 M20J MSE with IO-360-A3B6D?
Do you know what it takes to swap the original 2-blade for this? (new prop governor for instance?)

[hammdo]

Title says 10k

-Don

[Alan Fox]

8 hours ago, gevertex said:

Looks beautiful! I have a few questions.

 

How much are you asking?
Does it fit 92 M20J MSE with IO-360-A3B6D?
Do you know what it takes to swap the original 2-blade for this? (new prop governor for instance?)

Yes this is STCd for all the 4 cyl Mooneys , The only difference being the spinners , This was removed from an M20F with the ARI cowl mod , so it has the correct spinner for a J model... The STC does not call out for a governor change..  

[gevertex]

17 hours ago, hammdo said:

Title says 10k

-Don

Missed it. Thanks

[M20eJosh]

Hello. I’m sure this is long gone. Curious if you still have it? Would be interested in purchasing.

[Fly Boomer]

33 minutes ago, M20eJosh said:

Curious if you still have it?

To be sure Alan sees your question, it's best to quote a few words from one of his posts above like this:

On 1/17/2024 at 6:07 AM, Alan Fox said:

STCd for all the 4 cyl Mooneys

 

[M20eJosh]

On 1/17/2024 at 4:07 AM, Alan Fox said:

Yes this is STCd for all the 4 cyl Mooneys , The only difference being the spinners , This was removed from an M20F with the ARI cowl mod , so it has the correct spinner for a J model... The STC does not call out for a governor change..  

Hello. I’m sure this is long gone. Curious if you still have it? Would be interested in purchasing.

[M20eJosh]

7 hours ago, Fly Boomer said:

To be sure Alan sees your question, it's best to quote a few words from one of his posts above like this:

 

Thank you just did this