Bushings for elevator hing 914001-3

[Rodeo John]

Does anyone know the part number for the bushings ?

[Jpravi8tor]

are they located here?

 

[Jpravi8tor]

sorry I see you have a 66 m20E

 

[Jpravi8tor]

I see a 9140001-3 attach hinge this would be a @M20Doc question

 

[carusoam]

Nice work jpr!

MSer of the day award for that kind of help.

Go MS!

[Jpravi8tor]

If I had known the bearing part number or bearing dimensions that would have been worthy! I just replaced all the hardware in my elevator attach fittings and was surprised to find the bearings in great shape!

 

[Rodeo John]

Page 116  -012 914001-003 is the same for 1966 M20E elevator hing

[PT20J]

I believe that Mooney uses PN4A ball bearings for control surface hinges.

[Guest]

12 hours ago, Rodeo John said:

Page 116  -012 914001-003 is the same for 1966 M20E elevator hing

The IPC a doesn’t break down the hinge fitting to the actual bearing part number.  Contact Mooney for the bearing part number.  Then with two small sockets and a C clamp you can change them.

[Guest]

My wife found the part number, Skip was close.  You need Heim Bearing PN3A also used in Cessna as S3895-1 or 0334128-3

[Jpravi8tor]

We need a library of sorts to catalogue data like this, I suspect it could be a forum category that once hard won information was found could be published, @irishpilot

@Stetson20 

@mooniac58

[Rodeo John]

Thanks to all I know somebody on this form would have all the right answers thanking everybody