Need a Spinner

[CopperJim]

Hello all -

I have a cracked bulkhead in my spinner and am having hard time getting Hartzell to respond.  

1967 M20F with cowl mods

The STC on my setup is SA02414CH-D.   This shows Hartzell part numbers for spinners of:

1. part#103585    Composite
2. part#835-54
3. part#835-54P
4. part#835-58
5. part#835-58P   I believe this is the one I have/need.

Anyone know where to look for a used version ?

 

 

 

[Hank]

@Alan Fox @Jerry Pressley @LASAR

These are where i would start . . .

[CopperJim]

Thank you, Hank!

[carusoam]

Welcome aboard CJ…

Hank has done a great Job of listing the best go to choices…

We also have a prop guy around here that knows spinners… @Cody Stallings

Best regards,

-a-

[Don Gates]

I have a spinner and back plate from my M20C with a Hartzell prop.  Next time I go to the hangar I’ll look for part numbers.  I put a J spinner on when I put the ARI cowl mod onto my plane.

[Don Gates]

On 8/26/2022 at 9:27 AM, CopperJim said:

Hello all -

I have a cracked bulkhead in my spinner and am having hard time getting Hartzell to respond.  

1967 M20F with cowl mods

The STC on my setup is SA02414CH-D.   This shows Hartzell part numbers for spinners of:

1. part#103585    Composite
2. part#835-54
3. part#835-54P
4. part#835-58
5. part#835-58P   I believe this is the one I have/need.

Anyone know where to look for a used version ?

 

Which cowl mod?

 

 

 

[CopperJim]

My A&P confirms the Dome only part# is:

C-3532-22P.    (polished aluminum) 

[Don Gates]

On 8/27/2022 at 1:13 PM, Don Gates said:

I have a spinner and back plate from my M20C with a Hartzell prop.  Next time I go to the hangar I’ll look for part numbers.  I put a J spinner on when I put the ARI cowl mod onto my plane.

Here are some pix.  Let me know if what I have can help!

Don

[CopperJim]

Thank you, Don.   I'll check it out with my A&P today.   However - this looks like the OEM Mooney spinner for a C, correct?  Mine is the more pointy "J" version as (I have learned from Alan Fox) my cowling is also the ARI cowl mod.

[Don Gates]

33 minutes ago, CopperJim said:

Thank you, Don.   I'll check it out with my A&P today.   However - this looks like the OEM Mooney spinner for a C, correct?  Mine is the more pointy "J" version as (I have learned from Alan Fox) my cowling is also the ARI cowl mod.

Ah, if you have a ARI cowl then nope,  not the right spinner.  You are correct, it’s a OEM style spinner (though not the original). I also have the ARI cowl mod.