KFC 150 Wiring Schematic for Long Body

[alextstone]

I have a Bravo with a KFC 150 that is failing its test sequence.  The avionics shop believes that its due to a shorted /broken wire from the AP disconnect switch on the yoke to the computer.  He tested the switch - OK.  He wants to find a copy of the wiring schematic for the KFC 150 for the installation specific to the long body Mooney....is there such a thing?  Where might I find one if so?

[donkaye]

26 minutes ago, alextstone said:

I have a Bravo with a KFC 150 that is failing its test sequence.  The avionics shop believes that its due to a shorted /broken wire from the AP disconnect switch on the yoke to the computer.  He tested the switch - OK.  He wants to find a copy of the wiring schematic for the KFC 150 for the installation specific to the long body Mooney....is there such a thing?  Where might I find one if so?

Hi Alex,

Did you try the swap with your extra KC 192 as a test?

[kortopates]

It should be in your Mooney electrical schematic for your serial number in your Bravo service manual. Start there.


Sent from my iPhone using Tapatalk

[alextstone]

1 hour ago, donkaye said:

Hi Alex,

Did you try the swap with your extra KC 192 as a test?

I swapped the KC 192 a couple of months ago, so the "new" one is the one in service now...

[alextstone]

1 hour ago, kortopates said:

It should be in your Mooney electrical schematic for your serial number in your Bravo service manual. Start there.


Sent from my iPhone using Tapatalk

Thanks, will do!

[Bob Weber]

I think I can get a copy of the installation manual.

What does it do when it fails, light flashing, sonalert beeping?

I can help you and your shop with this and save you time and money with both troubleshooting and any repair's.

webairconsulting.com

 

Edited November 23, 2019 by Bob Weber

[Vno]

1 hour ago, Bob Weber said:

I think I can get a copy of the installation manual.

What does it do when it fails, light flashing, sonalert beeping?

I can help you and your shop with this and save you time and money with both troubleshooting and any repair's.

webairconsulting.com

 

Had a similar issue with a KAP 150. For a small fee and less than an hour on the phone was able to diagnose exactly what was wrong. Well worth it to me.

Brian

[Baker Avionics]

7 hours ago, alextstone said:

I have a Bravo with a KFC 150 that is failing its test sequence.  The avionics shop believes that its due to a shorted /broken wire from the AP disconnect switch on the yoke to the computer.  He tested the switch - OK.  He wants to find a copy of the wiring schematic for the KFC 150 for the installation specific to the long body Mooney....is there such a thing?  Where might I find one if so?

Email will be ok for the manual?

[alextstone]

Thanks for all of the responses and the manual!!! MS comes through again!

Sent from my Pixel 3 XL using Tapatalk

[PT20J]

Try this.

KFC150 Installation Manual.pdf

[Baker Avionics]

On 11/23/2019 at 8:46 PM, PT20J said:

Try this.

KFC150 Installation Manal.pdf 2.21 MB · 6 downloads

Got him the STC manual!