Derrickearly Posted October 26, 2019 Report Posted October 26, 2019 Anyone have a source or alternative parts for the fresh air bezel and valve for a 20F? Thank you.
Yetti Posted October 26, 2019 Report Posted October 26, 2019 in the ceiling cabin wise? type this into google: mooneyspace Ball vent
M20F-1968 Posted October 26, 2019 Report Posted October 26, 2019 I may have some parts depending on what you need. The parts I woud have are from a 1968 F. John Breda
carusoam Posted October 26, 2019 Report Posted October 26, 2019 Plane plastics for a near facsimile... +1 for updating to a ball vent... more work, but better result. Best regards, -a-
N201MKTurbo Posted October 26, 2019 Report Posted October 26, 2019 I just upgraded to Wemacs and have the old vents for the overhead if that’s what you are looking for.
Derrickearly Posted October 26, 2019 Author Report Posted October 26, 2019 15 hours ago, RLCarter said: Got a photo of what you need? They are missing in my plane; however, they should be items 38 and 39 in the attached image. 1
Derrickearly Posted October 26, 2019 Author Report Posted October 26, 2019 15 hours ago, Yetti said: in the ceiling cabin wise? type this into google: mooneyspace Ball vent This vent is down near the floor between the two seats.
Derrickearly Posted October 26, 2019 Author Report Posted October 26, 2019 4 hours ago, M20F-1968 said: I may have some parts depending on what you need. The parts I woud have are from a 1968 F. John Breda Here is an image from the parts manual. I’m missing 38 and 39.
Derrickearly Posted October 26, 2019 Author Report Posted October 26, 2019 4 hours ago, N201MKTurbo said: I just upgraded to Wemacs and have the old vents for the overhead if that’s what you are looking for. What part numbers did you use please?
Derrickearly Posted October 26, 2019 Author Report Posted October 26, 2019 4 hours ago, carusoam said: Plane plastics for a near facsimile... +1 for updating to a ball vent... more work, but better result. Best regards, -a- No luck with plane plastics. I’m leaning towards a ball vent.
N201MKTurbo Posted October 26, 2019 Report Posted October 26, 2019 1 hour ago, Derrickearly said: What part numbers did you use please? 1
carusoam Posted October 26, 2019 Report Posted October 26, 2019 Paging @Derrickearly... See Rich’s pics above. We might all be on a different page..? How new is your 76 F? there are two sources of outside air... 1) At the ceiling... airflow controlled by a knob, opening the scoop on the roof. Newer planes got a naca duct in the tail... 2) At the instrument panel. The cabin heat system is attached to this one... controlled via push/pull on the instrument panel... Older Mooneys got slide gates... slightly newer Mooneys got butterfly valves. Best regards, -a-
Marauder Posted October 26, 2019 Report Posted October 26, 2019 Here is an image from the parts manual. I’m missing 38 and 39. I used one of these with an angled filler underneath to allow the airflow to point higher up. https://www.aircraftspruce.com/catalog/appages/plasticeyeball1.phpI’ll snap a picture tonight and show you. Sent from my iPad using Tapatalk Pro 1
Marauder Posted October 26, 2019 Report Posted October 26, 2019 Never mind the picture later. Here is the picture now. Sent from my iPad using Tapatalk Pro 1
Yetti Posted October 26, 2019 Report Posted October 26, 2019 Oh the one on the console below the throttle quadrant. Are you handy fabricating things? There are a couple of people here that part out planes.
Derrickearly Posted October 27, 2019 Author Report Posted October 27, 2019 Ordered one of these: https://www.aircraftspruce.com/catalog/appages/largealumavblack.php 1
Marauder Posted October 27, 2019 Report Posted October 27, 2019 Ordered one of these:https://www.aircraftspruce.com/catalog/appages/largealumavblack.php Let us know how it works out. Sent from my iPhone using Tapatalk Pro
eman1200 Posted October 27, 2019 Report Posted October 27, 2019 Never mind the picture later. Here is the picture now.... Silly question but what is this:
Marauder Posted October 27, 2019 Report Posted October 27, 2019 Silly question but what is this: Floor illuminating light and a jack set. The old handheld mic used to be plugged in there. Sent from my iPhone using Tapatalk Pro
eman1200 Posted October 27, 2019 Report Posted October 27, 2019 Floor illuminating light and a jack set. The old handheld mic used to be plugged in there. Sent from my iPhone using Tapatalk Pro Ahah, thanks. Seems like a good candidate for replacement with, um, say a bottle opener? Also, was this Ozzy Osborn’s plane?
Marauder Posted October 27, 2019 Report Posted October 27, 2019 Ahah, thanks. Seems like a good candidate for replacement with, um, say a bottle opener? Also, was this Ozzy Osborn’s plane? Bats baby. Bats! I think that picture was taken before we converted the former ashtray covering plate for a mount for a removable mygoflight iPad mount. The mark was a centering X. Sent from my iPhone using Tapatalk Pro
Hank Posted October 27, 2019 Report Posted October 27, 2019 Wow, I'm impressed! A light illuminating the floor! Fancy . . . All my C has is two overhead heaters, which throw red light towards the panel as a side effect of the incandescent heating elements.
Derrickearly Posted November 4, 2019 Author Report Posted November 4, 2019 Hopefully, this will work as an adapter for https://www.aircraftspruce.com/catalog/appages/largealumavblack.php 1
Marauder Posted November 4, 2019 Report Posted November 4, 2019 52 minutes ago, Derrickearly said: Hopefully, this will work as an adapter for https://www.aircraftspruce.com/catalog/appages/largealumavblack.php The largest challenge for these eyeball replacements is the 25 degree movement. You may need to modify the vent adapter to angle the eyeball to get the coverage you want. Looking forward to the final product.
Recommended Posts