Exhaust Mod 125.00

[Alan Fox]

Stop paying for the stupid springs that keep on breaking......From 66 E should fit any 200 horse single pipe exhaust Mooney.... Call Alan 856 419 5209....

[Seth]

Is that a legal part?  My springs on my former F kept breaking.

 

I love the concept - I would have installed this if as mentioned, it was legal - I no longer own the aircraft.

 

-Seth

[Marauder]

Is that a legal part? My springs on my former F kept breaking.

I love the concept - I would have installed this if as mentioned, it was legal - I no longer own the aircraft.

-Seth

One of these have been on my F for the whole time I have owned it (24 years). They do need to be put on correctly or they could rub on the firewall.

[orionflt]

hmm, that looks familiar

[Mooneymite]

That's what's on my C since I've owned it.

I didn't know there was another style bracket.

[1964-M20E]

I have one on my F

[yvesg]

Alan I need one for my C. I believe they are different than the one for an E.

Let me know when you get one :-)

Yves

[mooniac15u]

There is a Mooney service bulletin that allows for this change (sbm20-144).  The eligible C, D, E, and F serial numbers are in the service bulletin.

[Alan Fox]

Still available..

[stevesm20b]

I got tired of the factory springs breaking. I replace two in two years. I have two mufflers, one on each side. I made some out of coat hangers and put one on each side. Still good after two years. Each side takes two. Put the factory spring along with the home made spring on each side to determine which one will last longer. I believe you can replace a factory part with an owner made part. Anyway, a lot cheaper than the factory and not hard to make. Just used a deep socket to coil the wire around and bent the ends to match the original.

[N201MKTurbo]

I have one of those in my hanger. Minus the piece of tire.

[Alan Fox]

The tire adds character..