Panel Cutout Services

[dcrogers11]

Sometime back, I recall the mention of an individual that will do custom panel layouts and cutting and had done several Mooneys.  I can't seem to find that thread so could anyone enlighten me on someone they have used and contact info.  Mine will be a reletively simple project compared to some that I've seen in the forum with a sixpack setup on the left and a 695 Airgizmo, JPI-900, and new transponder on the right.  Lake Aero has the 8 and 9 hole configuration, but won't work for what I have. 

 

Thanks,

Don

[mulro767]

Check out my pics in my gallery Don. I know a guy down in Peachtree City, GA that did a beautiful job with my custom panel. Mine was so patched up from Loran and ADF removal and I wanted to start over with Garmin and a panel mounted Gizmo. I was quite pleased. I'll track down his number if you're interested. Mine was laser etched powder coated and he even added a Mooney logo. $1000.

[jamesm]

I just did the right side panel, needs a little more work. But If you have the ablity to create .dxf file then  take to a a place that has a water jet  I had go through a few interations to get it the way I wanted it.   water jet ~ $70 and powder coat was ~ $50,  Aluminum   2' x 2' 0.063" ~ $16.00 for , 0.063" 1"x 1"x12" aluminun angle  ~ $4.00 total about  ~$140.

       

 

James

'67C

[carusoam]

Mooney pilot....

http://www.hendricksmfg.com/panels.html?Iit=4&Ict=2

Best regards,

-a-