Do you have an Accu-Flite installed in your Mooney?

[Echo]

I am having my Accu-Flite installed next week.  Wondering (for those that have an Accu-Flite installed) Where did you mount the D.G. Adapter under the panel?  Based on length of leads it would appear that pilot sidewall or pilot firewall mounting would be optimal to reach the DG.  Thanks for any input.

I replaced the tubing in the tailcone and got the servo control mounted.  Putting your torso through the battery access hole and removing 60+ year old screws and tubing is a "sucky" (get it?) job.   

[takair]

Mine hangs from the tubes just above the pilots right leg, above the gear cove. I have a 64, so that is open. It made it very convenient for alignment. 

[Echo]

3 hours ago, takair said:

Mine hangs from the tubes just above the pilots right leg, above the gear cove. I have a 64, so that is open. It made it very convenient for alignment. 

My ‘65 is also open. Thanks. Scott 

[takair]

3 hours ago, Echo said:

My ‘65 is also open. Thanks. Scott 

I used adel clamps to the tube. 

[Echo]

6 hours ago, takair said:

I used adel clamps to the tube. 

You are awesome!  Bought adel clamps and that spot was perfect. Neither the location or the clamps were obvious to me. Thanks for your input big time takair!!  Scott