Jerry Pressley Posted January 5, 2023 Report Posted January 5, 2023 Good serviceable actuator with later 1057-00-5 Motor. Standard on Mooneys up through early 201. 12V . Guaranteed good of course, $3500 or best offer. Jerry Pressley 423 231 3491. acpartswhse@aol.com
charlesual Posted January 5, 2023 Report Posted January 5, 2023 Hi Jerry,Is this a 20:1 or 40:1 gear? ThxSent from my iPhone using Tapatalk
Jerry Pressley Posted January 6, 2023 Author Report Posted January 6, 2023 removed from 77 291. can check for 20 - 1 04 40 - 1 if it will work for you. does yours have the extension crank by your left knee or in the rear floor?
N201MKTurbo Posted January 6, 2023 Report Posted January 6, 2023 It is exactly the same as mine. Some day I’ll regret not buying it. 1
charlesual Posted January 6, 2023 Report Posted January 6, 2023 I have the extension crank next to my left kneeSent from my iPhone using Tapatalk
charlesual Posted January 6, 2023 Report Posted January 6, 2023 I’m interested if it’s a 40:1Sent from my iPhone using Tapatalk
Jerry Pressley Posted January 6, 2023 Author Report Posted January 6, 2023 ok let me find a way to check. jerry
Jerry Pressley Posted January 6, 2023 Author Report Posted January 6, 2023 suggestion on how to tell?
N201MKTurbo Posted January 6, 2023 Report Posted January 6, 2023 8 minutes ago, Jerry Pressley said: suggestion on how to tell? Take it apart and count the teeth, or spin the rubber coupling with your fingers and count the number of revolutions to get one revolution of the screw.
Jerry Pressley Posted January 8, 2023 Author Report Posted January 8, 2023 20 to 1 I can have it converted to 40 to 1 if you like. What is it worth to you as 20 to 1 and you convert of how much if i convert? What is wrong with yours? I have an extra motor assy.
jetdriven Posted January 8, 2023 Report Posted January 8, 2023 If its 20:1 it didnt come off the m20J.
charlesual Posted January 9, 2023 Report Posted January 9, 2023 I have an F with 20:1. Works fine but I’d like to trade for a 40:1 because it eliminates an inspection and allows me to add inner gear doors for an extra few knots. Sent from my iPhone using Tapatalk 2
GDGR Posted January 16, 2023 Report Posted January 16, 2023 On 1/8/2023 at 7:39 AM, Jerry Pressley said: 20 to 1 I can have it converted to 40 to 1 if you like. What is it worth to you as 20 to 1 and you convert of how much if i convert? What is wrong with yours? I have an extra motor assy. If you have the parts to change to 40:1, message me and I’ll take two sets.
charlesual Posted January 16, 2023 Report Posted January 16, 2023 I’d be interested in a set of 40:1 as wellSent from my iPhone using Tapatalk
Recommended Posts