M20F-1968 Posted January 2, 2021 Report Posted January 2, 2021 I have the 4" Specmat Technologies Discharge Wicks on my airplane. I am not at the hangar. Can anyone get me the proper part number? Are there any others that would work. I changing shirts at the hanger, put my arm in a sleeve, mildly hit the base of the wick on the rudder and it broke in half in a millisecond. Really do not want to pay $55 bucks for this problem. John Breda
M20F-1968 Posted January 2, 2021 Author Report Posted January 2, 2021 Well I have a partial answer: Specmat 10-900-59/1 and 10-900-60/1 it seems will both work. The 60/1 I think is the 4" version. There is also a TSO DD-1W which apparently is a replacement, but I have seen it listed for non-certified aircraft. Anyone know more than that to advise the best replacement for the least money? John Breda
PT20J Posted January 2, 2021 Report Posted January 2, 2021 I bought some TCO DD-1(W) from SkyGeek but returned them as they were 6” long not 4. Couldn’t find a retail source for the Specmats which are on my airplane. Ended up just buying them from LASAR. Yeah, they’re expensive. I remove them when the plane goes in a shop for maintenance. I also check the torque on them during preflight ever since one went missing during a flight. Skip
M20S Driver Posted January 2, 2021 Report Posted January 2, 2021 I accidentally broke one today. I found the 60/1 on ebay. I have one spare already so feel free to outbid me if you need to get them. my maximum bid currently is $66 for two but the current bid is $61. They list $5.00 for shipping.
Marc_B Posted June 26 Report Posted June 26 @JLG best deal I've found https://www.scross.com/store/part-number?10-900-60-1
Mark89114 Posted June 26 Report Posted June 26 I just had one replaced, that price seems about right. My buddy had to have one replaced as well, he may or may not have used the experimental version.
Recommended Posts